UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-K

[X]	ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the Fiscal Year Ended May 31, 2015, or

 

[  ]	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the Transition period for _________ to _________.

 Commission file number: 0-27446

 

LANDEC CORPORATION

(Exact name of registrant as specified in its charter)

 

Delaware	94-3025618
(State or other jurisdiction of	(IRS Employer
incorporation or organization)	Identification Number)

 

3603 Haven Avenue

Menlo Park, California 94025

(Address of principal executive offices)

 

Registrant's telephone number, including area code:

(650) 306-1650

Securities registered pursuant to Section 12(b) of the Act:

 

Title of each class	Name of each exchange on which registered
Common Stock	The NASDAQ Global Select Stock Market

 

Securities registered pursuant to Section 12(g) of the Act:

None

(Title of Class)

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.

Yes ___ No    X

 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.

Yes ___ No    X

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Act during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

 Yes   X   No ___

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).

Yes   X   No ___

 

  

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. __

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See definition of “large accelerated filer” and “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

 

Large Accelerated Filer ___     Accelerated Filer X                         

Non Accelerated Filer ___     Smaller Reporting Company ___

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).

 

Yes ___ No   X     

 

The aggregate market value of voting stock held by non-affiliates of the Registrant was approximately $344,754,000 as of November 30, 2014, the last business day of the registrant’s most recently completed second fiscal quarter, based upon the closing sales price on The NASDAQ Global Select Market reported for such date. Shares of Common Stock held by each officer and director and by each person who owns 10% or more of the outstanding Common Stock have been excluded from such calculation in that such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.

 

As of July 17, 2015, there were 27,009,342 shares of Common Stock outstanding.

 

DOCUMENTS INCORPORATED BY REFERENCE

 

Portions of the registrant’s definitive proxy statement relating to its October 2015 Annual Meeting of Stockholders which statement will be filed not later than 120 days after the end of the fiscal year covered by this report, are incorporated by reference in Part III hereof.

 

 

LANDEC CORPORATION

ANNUAL REPORT ON FORM 10-K

 

TABLE OF CONTENTS

 

Item No.	Description	Page
Part I
1.	Business	4
1A.	Risk Factors	13
1B.	Unresolved Staff Comments	21
2.	Properties	21
3.	Legal Proceedings	21
4.	Mine Safety Disclosures	21
Part II
5.	Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities	22
6.	Selected Financial Data	22
7.	Management’s Discussion and Analysis of Financial Condition and Results of Operations	23
7A.	Quantitative and Qualitative Disclosures about Market Risk	41
8.	Financial Statements and Supplementary Data	41
9.	Changes in and Disagreements with Accountants on Accounting and Financial Disclosure	41
9A.	Controls and Procedures	42
9B.	Other Information	43
Part III
10.	Directors, Executive Officers and Corporate Governance	44
11.	Executive Compensation	44
12.	Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters	44
13.	Certain Relationships and Related Transactions, and Director Independence	44
14.	Principal Accountant Fees and Services	44
Part IV
15.	Exhibits and Financial Statement Schedules	45

 

 

PART I

Item 1.     Business

 

This report contains forward-looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934. Words such as “projected,” “expects,” “believes,” “intends,” “assumes” and similar expressions are used to identify forward-looking statements. These statements are made based upon current expectations and projections about our business and assumptions made by our management and are not guarantees of future performance, nor do we assume any obligation to update such forward-looking statements after the date this report is filed. Our actual results could differ materially from those projected in the forward-looking statements for many reasons, including the risk factors listed in Item 1A. “Risk Factors” and the factors discussed below.

 

Corporate Overview

 

Landec Corporation and its subsidiaries (“Landec” or the “Company”) design, develop, manufacture and sell differentiated products for food and biomaterials markets and license technology applications to partners. The Company is focused on health and wellness solutions and applications within the packaged food and biomaterial markets. In our Apio, Inc. (“Apio”) food business, we are committed to offering healthy, fresh produce products conveniently packaged to consumers. Apio also exports whole fruit and vegetables, predominantly to Asia through its subsidiary, Cal Ex Trading Company (“Cal-Ex”). In our Lifecore Biomedical, Inc. (“Lifecore”) biomaterials business, we commercialize products that enable people to stay more active as they grow older.

 

Landec’s food and biomaterials businesses utilize polymer chemistry technology, a key differentiating factor. Both core businesses focus on business-to-business selling such as selling directly to retail grocery store chains and club stores for Apio and directly to large ophthalmic suppliers for Lifecore. Both core businesses also benefit from the momentum that underlies consumer interest in healthy living - eating better and staying active.

 

Within our two core businesses, Landec has three operating segments – Food Products Technology, Food Export and HA-based Biomaterials, each of which is described below. Financial information concerning each of these segments for fiscal years 2015, 2014 and 2013 is summarized in Note 11 to the Consolidated Financial Statements.

 

Apio operates our Food Products Technology business, which combines our proprietary BreatheWay® food packaging technology with the capabilities of a large national food supplier and value-added produce processor which sells products under the Eat Smart® and GreenLine® brands and under private labels. In Apio’s value-added operations, produce is processed by trimming, washing, mixing, and packaging in bags and trays that in most cases incorporate Landec’s BreatheWay membrane technology. The BreatheWay membrane increases shelf life and reduces shrink (waste) for retailers and helps ensure that consumers receive fresh produce by the time the product makes its way through the supply chain. Apio also licenses the BreatheWay technology to partners such as Chiquita Brands International, Inc. (“Chiquita”) for packaging and distribution of bananas and to Windset Holding 2010 Ltd., a Canadian corporation (“Windset”), for packaging of greenhouse grown cucumbers and peppers.

 

Apio also operates the Food Export business. The Food Export business purchases and sells whole fruit and vegetable products predominantly to Asian markets.

 

Lifecore operates our HA-based Biomaterials business and is principally involved in the manufacture of pharmaceutical-grade sodium hyaluronate (“HA”) products. Sodium hyaluronate is a naturally occurring polysaccharide that is widely distributed in the extracellular matrix in animals and humans. Based upon Lifecore’s expertise working with highly viscous HA, the Company also specializes in aseptic filling services, as a contract development and manufacturing organization (CDMO), for difficult to handle (viscous) medicines filled in finished dose syringes.

 

Landec was incorporated in California on October 31, 1986 and reincorporated as a Delaware corporation on November 6, 2008. Our common stock is listed on The NASDAQ Global Select Market under the symbol “LNDC”.

 

 

Technology Overview

 

The Company has two proprietary polymer technology platforms: 1) Intelimer® materials, which are the key technology behind our BreatheWay membrane technology, and 2) hyaluronan biopolymers. The Company’s materials are generally proprietary as a result of being patented or due to being specially formulated for specific customers to meet specific commercial applications and/or specific regulatory requirements. The Company’s polymer technologies, its customer relationships and trade names and its strong channels of distribution, are the foundation and key differentiating advantages on which Landec has built its business.

 

A) Intelimer Polymers

 

Intelimer polymers are crystalline, hydrophobic polymers that use a temperature switch to control and modulate properties such as viscosity, permeability and adhesion when varying the materials’ temperature above and below the temperature switch. The sharp temperature switch is adjustable at relatively low temperatures (0°C to 100°C) and the changes resulting from the temperature switch are relatively easy to maintain in industrial and commercial environments. For instance, Intelimer polymers can change within the range of one or two degrees Celsius from a non-adhesive state to a highly tacky, adhesive state; from an impermeable state to a highly permeable state; or from a solid state to a viscous liquid state.

 

Landec's proprietary polymer technology is based on the structure and phase behavior of Intelimer materials. The abrupt thermal transitions of specific Intelimer materials are achieved through the controlled use of hydrocarbon side chains that are attached to a polymer backbone. Below a pre-determined switch temperature, the polymer's side chains align through weak hydrophobic interactions resulting in a crystalline structure. When this side chain crystallizable polymer is heated to, or above, this switch temperature, these interactions are disrupted and the polymer is transformed into an amorphous, viscous state. Because this transformation involves a physical and not a chemical change, this process can be repeatedly reversible. Landec can set the polymer switch temperature anywhere between 0°C to 100°C by varying the average length of the side chains.

 

Landec's Intelimer materials are readily available and are generally synthesized from long side-chain acrylic monomers that are derived primarily from natural materials such as coconut and palm oils that are highly purified and designed to be manufactured economically through known synthetic processes. These acrylic-monomer raw materials are then polymerized by Landec leading to many different side-chain crystallizable polymers whose properties vary depending upon the initial materials and the synthetic process. Intelimer materials can be made into many different forms, including films, coatings, microcapsules and discrete forms. Intelimer polymers are the coatings on the substrate used to form our BreatheWay membranes.

 

BreatheWay Membrane Packaging 

 

Certain types of fresh-cut and whole produce can spoil or discolor rapidly when packaged in conventional packaging materials and, therefore, are limited in their ability to be distributed broadly to markets. The Company’s proprietary BreatheWay packaging technology utilizes Landec’s Intelimer polymer technology to naturally extend the shelf life and quality of fresh-cut and whole produce.

 

After harvesting, vegetables and fruit continue to respire, consuming oxygen and releasing carbon dioxide. Too much or too little oxygen can result in premature spoilage and decay. The respiration rate of produce varies for each fruit and vegetable. Conventional packaging films used today, such as polyethylene and polypropylene, can be made with modest permeability to oxygen and carbon dioxide, but often do not provide the optimal atmosphere for the packaged produce. To achieve optimal product performance, each fruit or vegetable requires its own unique package atmosphere conditions. The challenge facing the industry is to develop packaging that meets the highly variable needs that each product requires in order to achieve value-creating performance. The Company believes that its BreatheWay packaging technology possesses all of the critical functionalities required to serve this diverse market. In creating a product package, a BreatheWay membrane is applied over a small cutout section or an aperture of a flexible film bag or plastic tray. This highly permeable “window” acts as the mechanism to provide the majority of the gas transmission requirements for the entire package. These membranes are designed to provide three principal benefits:

  

 

High Permeability. Landec's BreatheWay packaging technology is designed to permit transmission of oxygen and carbon dioxide at 300 to 1,000 times the rate of conventional packaging films. The Company thinks that these higher permeability levels will facilitate the packaging diversity required to market many types of fresh-cut and whole produce in many package sizes and configurations.

 

Ability to Adjust Oxygen and Carbon Dioxide Ratios. BreatheWay packaging can be tailored with carbon dioxide to oxygen transfer ratios ranging from 1.0 to 12.0 to selectively transmit oxygen and carbon dioxide at optimum rates to sustain the quality and shelf life of packaged produce. Other high permeability packaging materials, such as micro-perforated films cannot differentially control carbon dioxide permeability, resulting in sub-optimal package atmosphere conditions for many produce products.

 

Temperature Responsiveness. Landec has developed breathable membranes that can be designed to increase or decrease permeability in response to environmental temperature changes. The Company has developed packaging that responds to higher oxygen requirements at elevated temperatures but is also reversible, and returns to its original state as temperatures decline. As the respiration rate of fresh produce also increases with temperature, the BreatheWay membrane’s temperature responsiveness allows packages to compensate for the change in produce respiration by automatically adjusting gas permeation rates. By doing so, detrimental package atmosphere conditions are avoided and improved quality is maintained through the distribution chain.

 

B) Sodium Hyaluronate (HA)

 

Sodium hyaluronate is a non-crystalline, hydrophilic polymer that exists naturally as part of the extracellular matrix in many tissues within the human body, most notably within the aqueous humor of the eye, synovial fluid, skin and umbilical cord. The viscoelastic properties and water solubility of HA make it ideal for medical applications where space maintenance, lubricity or tissue protection are critical. Because of its widespread presence in tissues, its critical role in normal physiology, and its high degree of biocompatibility, the Company believes that hyaluronan will continue to be used in existing applications and for an increasing variety of other medical applications.

 

Sodium hyaluronate can primarily be produced in two ways, either through bacterial fermentation or through extraction from rooster combs. Lifecore produces HA only from fermentation, using an extremely efficient microbial fermentation process and a highly effective purification operation.

 

Sodium hyaluronate was first demonstrated to have commercial medical utility as a viscoelastic solution in cataract surgery. In this application, it is used for maintaining the space in the anterior chamber and protecting corneal tissue during the removal and implantation of intraocular lenses. The first ophthalmic HA product, produced by extraction from rooster comb tissue, became commercially available in the United States in 1981. In 1985, Lifecore introduced the bacterial fermentation process to manufacture premium HA and received patent protection until 2002. HA-based products, produced either by rooster comb extraction or by fermentation processes such as Lifecore’s, have since gained widespread acceptance in ophthalmology and are currently used in the majority of cataract extraction procedures in the world. HA has also become a significant component in several products used in orthopedics. Lifecore’s HA is used as a viscous carrier for allogeneic freeze-dried demineralized bone used in spinal surgery, and as the active component of devices to treat the symptoms of osteoarthritis, and as a component to provide increased lubricity to medical devices. Lifecore’s HA has also been utilized in veterinary drug applications to treat traumatic arthritis.

 

Description of Business Segments

 

In this Description of Business Segments section, “Apio” and the “Food Products Technology business” will be used interchangeably; however, when describing Apio’s export business it will be referred to as the “Food Export business”.

  

  

A) Food Products Technology Business

 

The Food Products Technology business had revenues of $430 million for the fiscal year ended May 31, 2015, $361 million for the fiscal year ended May 25, 2014 and $320 million for the fiscal year ended May 26, 2013.

 

Based in Guadalupe, California, Apio’s primary business is fresh-cut and whole value-added products typically packaged in our proprietary BreatheWay packaging. Apio’s fresh-cut value-added products business markets a variety of fresh-cut and whole vegetables to the top retail grocery chains, club stores and food service operators. During the fiscal year ended May 31, 2015, Apio shipped approximately 32 million cartons of produce to its customers throughout North America, primarily in the United States.

 

Most vegetable products packaged in our BreatheWay packaging have 17 to 20 days of shelf life. In addition to packaging innovation, Landec’s Apio food business develops innovative blends and combinations of vegetables that are sold in flexible film bags or rigid trays. More recently, the Company has launched a family of salad kits that are comprised of “superfood” mixtures of vegetables with healthy toppings/dressings. The launch of the first of these products called Sweet Kale Salad has broken all of Apio’s records for speed of adoption with weekly sales of over $2 million as of May 2015. Additionally, we have launched several other superfood salad kits including Ginger Bok Choy, Wild Greens and Quinoa, Beets and Greens, Kale and Chard Stir Fry and Shanghai Stir Fry. The Company’s expertise includes accessing leading culinary experts and nutritionists nationally to help in the new product development process. We believe that our new products are “on trend” and strong market acceptance supports this belief. Recent statistics show that more than two-thirds (68.8%) of adults are considered to be overweight or obese and more than one-third (35.7%) of adults are considered to be obese. More and more consumers are beginning to make better food choices in their schools, homes and in restaurants and that is where our superfood products can fit into consumers daily healthy food choices.

 

In addition to proprietary packaging technology and a strong new product development pipeline, the Company has strong channels of distribution throughout North America with retail grocery store chains and club stores. Landec has one or more of its products in approximately 70% of all retail and club store sites in North America giving us a strong platform for introducing new products.

 

The Company sells its products under the nationally-known brands EatSmart and GreenLine. The Company also periodically licenses its BreatheWay packaging technology to partners such as Chiquita for packaging bananas and to Windset for packaging peppers and cucumbers that are grown hydroponically in greenhouses. These packaging license relationships generate revenues either from product sales or royalties once commercialized. The Company is engaged in the testing and development of other BreatheWay products. Landec manufactures its BreatheWay packaging through selected qualified contract manufacturers.

 

Apio Business Model

  

 

Landec is working with leaders in club stores, retail grocery chains and food service customers. The Company thinks it will have growth opportunities for the next several years through new customers and the introduction of innovative products in the United States, expansion of its existing customer relationships, and export and shipment of specialty packaged produce.

 

There are five major distinguishing characteristics of Apio that provide competitive advantages in the Food Products Technology market:

 

Value-Added Supplier: Apio has structured its business as a marketer and seller of branded and private label fresh-cut and whole value-added produce. It is focused on selling products under its Eat Smart and GreenLine brands and private label brands for its fresh-cut and whole value-added products. As retail grocery chains, club stores and food service operators consolidate, Apio is well positioned as a single source of a broad range of products.

 

Reduced Farming Risks: Apio reduces its farming risk by not taking ownership of farmland, and instead, contracts with growers for produce and during certain times of the year, enters into joint ventures with growers for produce. The year-round sourcing of produce is a key component to the fresh-cut and whole value-added processing business.

 

Access to Customer Base: Apio has strategically invested in the rapidly growing fresh-cut and whole value-added business. Apio’s value-added processing plant in Guadalupe, CA, is automated with state-of-the-art vegetable processing equipment. Apio operates one large central processing facility in one of the lowest cost growing regions in California, the Santa Maria Valley, and for the majority of its non-green bean vegetable business, uses its packaging technology for nationwide delivery. With the acquisition of GreenLine, Apio now has three East Coast processing facilities and five East Coast distribution centers for nationwide delivery of green beans and Apio has begun processing non-green bean products in one of its East Coast processing facilities to meet the next-day delivery needs of customers.

 

Expanded Product Line Using Technology and Unique Blends: Apio, through the use of its BreatheWay packaging technology, is introducing new value-added products each year. These new product offerings range from various sizes of fresh-cut bagged products, to vegetable trays, to whole produce, to vegetable salads and to snack packs. During the last twelve months, Apio has introduced nine new unique products.

 

Products Currently in Approximately 70% of U.S. Retail Grocery Stores: With the acquisition of GreenLine, Apio now has products in approximately 70% of all U.S. retail grocery stores. This gives Apio the opportunity to cross sell Eat Smart value-added products to GreenLine customers and GreenLine value-added products to Eat Smart customers.

 

Windset

 

The Company thinks that hydroponically grown produce using Windset’s (see Note 2 to the Consolidated Financial Statements for a description of the Company’s investment in Windset) know-how and growing practices will result in higher yields with competitive growing costs that will provide dependable year round supply to Windset’s customers. In addition, the produce grown in Windset’s greenhouses has a very high safety profile as no soil is used in the growing process. Windset owns and operates greenhouses in British Columbia, Canada and in Nevada and California. In addition to growing produce in its own greenhouses, Windset has numerous marketing arrangements with other greenhouse growers and utilizes buy/sell arrangements to meet fluctuation in demand from their customers.

 

B) Food Export Business

 

Food Export revenues consist of revenues generated from the purchase and sale of primarily whole commodity fruit and vegetable products to Asia through Apio’s export business, Cal-Ex. The Food Export business is a commission-based buy/sell business that typically realizes a gross margin in the 5-10% range.

  

 

The Food Export business had revenues of $68 million for the fiscal year ended May 31, 2015, $70 million for the fiscal year ended May 25, 2014 and $79 million for the fiscal year ended May 26, 2013.

 

Apio is strategically positioned with Cal-Ex to benefit from the growing population and wealth in Asia and other parts of the world over the next decade. Through Cal-Ex, Apio is currently one of the largest U.S. exporters of broccoli to Asia. Other large export items include apples, grapes, stonefruit and citrus.

 

C) HA-based Biomaterials

 

Our HA-based Biomaterials business operates through our Lifecore subsidiary. Lifecore had revenues of $40 million for the fiscal year ended May 31, 2015, $46 million for the fiscal year ended May 25, 2014 and $41 million for the fiscal year ended May 26, 2013.

 

Lifecore operates our medical materials business and is principally involved in the manufacture of pharmaceutical-grade sodium hyaluronate products in the form of injectable products for ophthalmologic and orthopedic applications. There is now a greater percentage of Americans age 65 and older than at any other time in U.S. history and currently over 45 million Americans are 65 years of age or older and this trend is going to accelerate dramatically over the upcoming years. As our population ages, eye surgeries such as cataract surgeries, will increase and patients will increasingly seek joint therapy as cartilage and soft tissue deteriorates. HA injections are a primary course of treatment for such conditions and Lifecore has built a leadership position in the markets it serves. The World Health Organization estimates that by 2020, 32 million cataract operations will be performed worldwide, up from 12 million in 2000. Lifecore’s expertise includes its ability to ferment, separate, purify, and aseptically fill HA for injectable product use. In addition to ophthalmic and orthopedic uses, veterinary medicine is another application for Lifecore’s HA. Lifecore leverages its fermentation process to manufacture premium, pharmaceutical-grade HA and uses its aseptic filling capabilities to also deliver private-labeled HA finished products to its customers. Lifecore sells its products through partners in the U.S., Europe and South America. Lifecore has built its reputation as a premium supplier of HA.

 

Lifecore’s products are primarily sold to strategic marketing partners for use in three medical areas: (1) Ophthalmic, (2) Orthopedic and (3) Veterinary. In addition, Lifecore provides product development services to its partners for HA-based, as well as non-HA based, fermented products and aseptically formulated products. These services include activities such as tech transfer, material component changes, analytical method development, pilot studies, stability studies, process validation, and clinical production.

 

By leveraging its fermentation process and aseptic formulation and filling expertise, Lifecore has become a leader in the supply of HA-based products for multiple applications, and has taken advantage of non-HA device and drug opportunities by leveraging its expertise in manufacturing and aseptic syringe filling capabilities. Elements of Lifecore’s strategy include the following:

 

•     Establish strategic relationships with market leaders. Lifecore will continue to develop applications for products with partners who have strong marketing, sales and distribution capabilities to end-user markets. Through its strong reputation and history of providing pharmaceutical grade HA and products, Lifecore has been able to establish long-term relationships with the market leading ophthalmic surgical companies, and leverages those partnerships to attract new relationships in other medical markets.

 

•     Expand medical applications for HA. Due to the growing knowledge of the unique characteristics of HA, and the role it plays in normal physiology, Lifecore continues to identify and pursue opportunities for the use of HA in other medical applications, such as wound care, aesthetic surgery, drug delivery, device coatings and through pharmaceutical sales to academic and corporate research customers. Further applications may involve expanding process development activity and/or additional licensing of technology.

 

•     Utilize manufacturing infrastructure to pursue contract aseptic filling and fermentation opportunities. Lifecore has made strategic capital investments in its contract manufacturing and development business focusing on extending its aseptic filling capacity and capabilities. It is investing in this segment to meet increasing partner demand and attract new contract filling opportunities. Lifecore is using its manufacturing capabilities to provide contract manufacturing and development services to its partners in the area of sterile pre-filled syringes and fermentation and purification requirements.

 

  

•     Maintain flexibility in product development and supply relationships. Lifecore’s vertically integrated development and manufacturing capabilities allow it to establish a variety of contractual relationships with global corporate partners. Lifecore’s role in these relationships extends from supplying HA raw materials to providing tech transfer and development services to manufacturing aseptically-packaged, finished sterile products and to assuming full supply chain responsibilities.

 

Trademarks/Trade names

 

Intelimer®, Landec®, Apio™, Eat Smart®, BreatheWay®, GreenLine®, Clearly Fresh™, Lifecore®, LUROCOAT^® and Ortholure™ are some of the trademarks or registered trademarks and trade names of the Company in the United States and other countries. This Annual Report on Form 10-K also refers to the trademarks of other companies.

 

Sales and Marketing

 

Apio is supported by dedicated sales and marketing resources. Apio has 42 sales and marketing employees, located in central California and throughout the U.S., supporting the Food Products Technology business and the Food Export business. During fiscal years 2015, 2014 and 2013, sales to the Company’s top five customers accounted for approximately 46%, 42% and 40%, respectively, of its revenues, with the top two customers, both from the Food Products Technology segment, Costco Wholesale Corporation (“Costco”) which accounted for approximately 21%, 21%, and 16%, respectively, and Wal-mart, Inc. (“Wal-mart”) which accounted for approximately 11%, 11%, and 13%, respectively, of the Company’s revenues. A loss of either of these customers would have a material adverse effect on the Company’s business.

 

Lifecore sells products to partners under supply agreements and also through distribution agreements. Excluding research sales, Lifecore does not sell to end users and, therefore, does not have the traditional infrastructure of a dedicated sales force and marketing employees and its name recognition allows Lifecore to attract new customers and offer its services with a minimal marketing and sales infrastructure.

 

Seasonality

 

Apio’s sales are seasonal. The Food Products Technology business can be affected by seasonal weather factors, such as the high cost of sourcing product due to a shortage of essential value-added produce items, which have impacted quarterly results in the past. The Food Export business also typically recognizes a much higher percentage of its revenues and profit during the first half of Landec’s fiscal year compared to the second half. Lifecore’s business is not significantly affected by seasonality.

 

Manufacturing and Processing

 

Food Products Technology Business

 

The manufacturing process for the Company's proprietary BreatheWay packaging products is comprised of polymer manufacturing, membrane manufacturing and label package conversion. A third party toll manufacturer currently makes virtually all of the polymers for the BreatheWay packaging system. Select outside contractors currently manufacture the breathable membranes, and Apio performs the label package conversion in its various processing facilities.

 

Apio processes a large majority of its fresh-cut, value-added non-green bean products in its processing facility located in Guadalupe, California. Cooling of produce is done through third parties and Apio Cooling LP, a separate consolidated subsidiary in which Apio has a 60% ownership interest and is the general partner.

  

 

Apio processes its fresh-cut, value-added green bean products in four processing plants located in Guadalupe, California; Bowling Green, Ohio; Hanover, Pennsylvania; and Vero Beach, Florida.

 

Hyaluronan-based Biomaterials Business

 

The commercial production of HA by Lifecore requires fermentation, separation and purification capabilities. Products are supplied in a variety of bulk and single dose configurations.

 

Lifecore produces its HA through a bacterial fermentation process. Medical grade HA was initially commercially available only through an extraction process from rooster combs. Lifecore believes that the fermentation manufacturing approach is superior to rooster comb extraction because of greater efficiency and flexibility, a more favorable long-term regulatory environment, and better economies of scale in producing large commercial quantities. Today’s HA competitors are primarily utilizing a fermentation process.

 

Lifecore’s 114,000 square foot facility in Chaska, Minnesota is used primarily for the HA manufacturing process, formulation and aseptic syringe and bulk filling. The Company considers that the current inventory on-hand, together with its manufacturing capacity, will be sufficient to allow it to meet the needs of its current customers for the foreseeable future.

 

Lifecore provides versatility in the manufacturing of various types of finished products. It supplies several different forms of HA in a variety of molecular weight fractions as powders, solutions and gels, and in a variety of bulk and single-use finished packages. Lifecore continues to conduct development work designed to improve production efficiencies and expand its capabilities to achieve a wider range of HA product specifications in order to address the broadening opportunities for using HA in medical applications.

 

The FDA inspects the Company’s manufacturing systems periodically and requires compliance with the FDA’s Quality System Regulation (“QSR”). In addition, Lifecore’s customers conduct intensive quality audits of the facility and its operations. Lifecore also periodically contracts with independent regulatory consultants to conduct audits of its operations.  Similar to other manufacturers subject to regulatory and customer specific requirements, Lifecore’s facility was designed to meet applicable regulatory requirements and has been cleared for the manufacturing of both device and pharmaceutical products. The Company maintains a Quality System which complies with applicable standards and regulations: FDA Medical Device Quality System requirements (21 CFR 820); FDA Drug Good Manufacturing Practices (21 CFR 210-211); European Union Good Manufacturing Practices (EudraLex Volume 4); Medical Device Quality Management System (ISO 13485); European Medical Device Directive; Canadian Medical Device Regulations; International Guide for Active Pharmaceutical Ingredients (ICH Q7), and Australian Therapeutic Goods Regulations).  Compliance with these international standards of quality greatly assists in the marketing of Lifecore’s products globally.

 

General

 

Several of the raw materials used in manufacturing certain of the Company’s products are currently purchased from a single source. Although to date the Company has not experienced difficulty acquiring materials for the manufacture of its products, no assurance can be given that interruptions in supplies will not occur in the future, that the Company will be able to obtain substitute vendors, or that the Company will be able to procure comparable materials at similar prices and terms within a reasonable time. Any such interruption of supply could have a material adverse effect on the Company’s ability to manufacture and distribute its products and, consequently, could materially and adversely affect the Company’s business, operating results and financial condition.

 

Research and Development

 

Landec is focusing its research and development resources on both existing and new product applications. Expenditures for research and development for the fiscal years ended May 31, 2015, May 25, 2014 and May 26, 2013 were $7.0 million, $7.2 million and $9.3 million, respectively. Research and development expenditures funded by corporate or governmental partners were zero during fiscal years 2015 and 2014 and $688,000 during fiscal year 2013. The Company may seek funds for applied materials research programs from U.S. government agencies as well as from commercial entities. The Company anticipates that it will continue to incur significant research and development expenditures in order to maintain its competitive position with a continuing flow of innovative, high-quality products and services. As of May 31, 2015, Landec had 64 employees engaged in research and development with experience in polymer and analytical chemistry, product application, product formulation, and mechanical and chemical engineering.

  

 

Competition

 

The Company operates in highly competitive and rapidly evolving fields, and new developments are expected to continue at a rapid pace. Competition from large food processors, packaging companies, and medical and pharmaceutical companies is intense. Many of these competitors have substantially greater financial and technical resources and production and marketing capabilities than the Company, and many have substantially greater experience in conducting field trials, obtaining regulatory approvals and manufacturing and marketing commercial products. There can be no assurance that these competitors will not succeed in developing alternative technologies and products that are more effective, easier to use or less expensive than those which have been or are being developed by the Company or that would render the Company's technology and products obsolete and non-competitive.

 

Patents and Proprietary Rights

 

The Company's success depends in large part on its ability to obtain patents, maintain trade secret protection and operate without infringing on the proprietary rights of third parties. The Company has had 48 U.S. patents issued of which 33 remain active as of May 31, 2015 with expiration dates ranging from 2015 to 2031. There can be no assurance that any of the pending patent applications will be approved, that the Company will develop additional proprietary products that are patentable, that any patents issued to the Company will provide the Company with competitive advantages or will not be challenged by any third parties or that the patents of others will not prevent the commercialization of products incorporating the Company's technology. Furthermore, there can be no assurance that others will not independently develop similar products, duplicate any of the Company's products or design around the Company's patents. Any of the foregoing results could have a material adverse effect on the Company's business, operating results and financial condition.

 

The commercial success of the Company will also depend, in part, on its ability to avoid infringing patents issued to others. If the Company were determined to be infringing any third party patent, the Company could be required to pay damages, alter its products or processes, obtain licenses or cease certain activities. In addition, if patents are issued to others which contain claims that compete or conflict with those of the Company and such competing or conflicting claims are ultimately determined to be valid, the Company may be required to pay damages, to obtain licenses to these patents, to develop or obtain alternative technology or to cease using such technology. If the Company is required to obtain any licenses, there can be no assurance that the Company will be able to do so on commercially favorable terms, if at all. The Company's failure to obtain a license to any technology that it may require to commercialize its products could have a material adverse impact on the Company's business, operating results and financial condition.

 

Government Regulation 

 

Government regulation in the United States and other countries is a significant factor in the marketing of certain of the Company’s products and in the Company’s ongoing research and development activities. Some of the Company’s products are subject to extensive and rigorous regulation by the FDA, which regulates some of the products as medical devices and which, in some cases, requires Pre-Market Approval (“PMA”), and by foreign countries, which regulate some of the products as medical devices or drugs. Under the Federal Food, Drug, and Cosmetic Act (“FDC Act”), the FDA regulates the clinical testing, manufacturing, labeling, distribution, sale and promotion of medical devices in the United States.

  

 

Other regulatory requirements are placed on the manufacture, processing, packaging, labeling, distribution, recordkeeping and reporting of a medical device and on the quality control procedures, such as the FDA’s device QSR regulations. Manufacturing facilities are subject to periodic inspections by the FDA to assure compliance with device QSR requirements, along with pre-approval inspection (PAI) for PMA product introduction. Lifecore’s facility is subject to inspections as both a device and a drug manufacturing operation. For PMA devices, the Company that owns the product submission is required to submit an annual report and to obtain approval of a PMA supplement for modifications to the device or its labeling. Other applicable FDA requirements include the medical device reporting (“MDR”) regulation, which requires that the Company provide information to the FDA regarding deaths or serious injuries alleged to have been associated with the use of its devices, as well as product malfunctions that would likely cause or contribute to death or serious injury if the malfunction were to recur.

 

Employees

 

As of May 31, 2015, Landec had 550 full-time employees, of whom 442 were dedicated to research, development, manufacturing, quality control and regulatory affairs and 108 were dedicated to sales, marketing and administrative activities. Landec intends to recruit additional personnel in connection with the development, manufacturing and marketing of its products. None of Landec's employees are represented by a union, and Landec considers its relationship with its employees to be good.

 

Available Information

 

Landec’s website is http://www.landec.com. Landec makes available free of charge its annual, quarterly and current reports, and any amendments to those reports, as soon as reasonably practicable after electronically filing such reports with the SEC. Information contained on our website is not part of this Report.

 

Item 1A. Risk Factors

 

Landec desires to take advantage of the “Safe Harbor” provisions of the Private Securities Litigation Reform Act of 1995 and of Section 21E and Rule 3b-6 under the Securities Exchange Act of 1934. Specifically, Landec wishes to alert readers that the following important factors could in the future affect, and in the past have affected, Landec’s actual results and could cause Landec’s results for future periods to differ materially from those expressed in any forward-looking statements made by or on behalf of Landec. Landec assumes no obligation to update such forward-looking statements.

 

Adverse Weather Conditions and Other Acts of God May Cause Substantial Decreases in Our Sales and/or Increases in Our Costs

 

Our Food Products Technology business is subject to weather conditions that affect commodity prices, crop quality and yields, and decisions by growers regarding crops to be planted. Crop diseases and severe conditions, particularly weather conditions such as unexpected or excessive rain or other precipitation, unseasonable temperature fluctuations, floods, droughts, frosts, windstorms, earthquakes and hurricanes, may adversely affect the supply of vegetables and fruits used in our business, which could reduce the sales volumes and/or increase the unit production costs. Because a significant portion of the costs are fixed and contracted in advance of each operating year, volume declines reflecting production interruptions or other factors could result in increases in unit production costs which could result in substantial losses and weaken our financial condition.

 

We Depend on Our Infrastructure to Have Sufficient Capacity to Handle Our On-Going Production Needs

 

We have an infrastructure that has sufficient capacity for our on-going production needs, but if we lose machinery or facilities due to natural disasters or mechanical failure, we may not be able to operate at a sufficient capacity to meet our production needs. This could have a material adverse effect on our business, which could impact our results of operations and our financial condition.

  

 

Our Future Operating Results Are Likely to Fluctuate Which May Cause Our Stock Price to Decline

 

In the past, our results of operations have fluctuated significantly from quarter to quarter and are expected to continue to fluctuate in the future. Apio can be affected by seasonal and weather factors which have impacted our financial results in the past due to shortages of essential value-added produce items. In addition, the quarterly fair market value change in our Windset investment can fluctuate substantially quarter to quarter. Our earnings may also fluctuate based on our ability to collect accounts receivable from customers and notes receivable from growers and on price fluctuations in the fresh vegetable and fruit markets. Other factors that affect our operations include:

 

our ability and our growers ability to obtain an adequate supply of labor,

 

our growers ability to obtain an adequate supply of water,

 

 the seasonality and availability of our supplies,

 

 our ability to process produce during critical harvest periods,

 

 the timing and effects of ripening,

 

 the degree of perishability,

 

 the effectiveness of worldwide distribution systems,

 

 total worldwide industry volumes,

 

 the seasonality and timing of consumer demand,

 

 foreign currency fluctuations, and

 

 foreign importation restrictions and foreign political risks.

 

As a result of these and other factors, we expect to continue to experience fluctuations in quarterly operating results.

 

We May Not Be Able to Achieve Acceptance of Our New Products in the Marketplace

 

Our success in generating significant sales of our products depends in part on our ability and that of our partners and licensees to achieve market acceptance of our new products and technology. The extent to which, and rate at which, we achieve market acceptance and penetration of our current and future products is a function of many variables including, but not limited to:

 

price,

 

safety,

 

efficacy,

 

reliability,

 

conversion costs,

 

regulatory approvals,

 

marketing and sales efforts, and

 

general economic conditions affecting purchasing patterns.

 

We may not be able to develop and introduce new products and technologies in a timely manner or new products and technologies may not gain market acceptance. We or our partners/customers are in the early stage of product commercialization of certain Intelimer-based specialty packaging, HA-based products and other Intelimer polymer products. We expect that our future growth will depend in large part on our or our partners/customers ability to develop and market new products in our target markets and in new markets. In particular, we expect that our ability to compete effectively with existing food products companies will depend substantially on developing, commercializing, achieving market acceptance of and reducing the cost of producing our products. In addition, commercial applications of our temperature switch polymer technology are relatively new and evolving. Our failure to develop new products or the failure of our new products to achieve market acceptance would have a material adverse effect on our business, results of operations and financial condition.

  

  

We Face Strong Competition in the Marketplace

 

Competitors may succeed in developing alternative technologies and products that are more effective, easier to use or less expensive than those which have been or are being developed by us or that would render our technology and products obsolete and non-competitive. We operate in highly competitive and rapidly evolving fields, and new developments are expected to continue at a rapid pace. Competition from large food products, industrial, medical and pharmaceutical companies is expected to be intense. In addition, the nature of our collaborative arrangements may result in our corporate partners and licensees becoming our competitors. Many of these competitors have substantially greater financial and technical resources and production and marketing capabilities than we do, and may have substantially greater experience in conducting clinical and field trials, obtaining regulatory approvals and manufacturing and marketing commercial products.

 

We Have a Concentration of Manufacturing for Apio and Lifecore and May Have to Depend on Third Parties to Manufacture Our Products

 

Any disruptions in our primary manufacturing operation at Apio’s facilities in Guadalupe, California or Bowling Green, Ohio or Lifecore’s facility in Chaska, Minnesota would reduce our ability to sell our products and would have a material adverse effect on our financial results. Additionally, we may need to consider seeking collaborative arrangements with other companies to manufacture our products. If we become dependent upon third parties for the manufacture of our products, our profit margins and our ability to develop and deliver those products on a timely basis may be adversely affected. Failures by third parties may impair our ability to deliver products on a timely basis and impair our competitive position. We may not be able to continue to successfully operate our manufacturing operations at acceptable costs, with acceptable yields, and retain adequately trained personnel.

 

Our Dependence on Single-Source Suppliers and Service Providers May Cause Disruption in Our Operations Should Any Supplier Fail to Deliver Materials

 

We may experience difficulty acquiring materials or services for the manufacture of our products or we may not be able to obtain substitute vendors. In addition, we may not be able to procure comparable materials at similar prices and terms within a reasonable time. Several services that are provided to Apio are obtained from a single provider. Several of the raw materials we use to manufacture our products are currently purchased from a single source, including some monomers used to synthesize Intelimer polymers, substrate materials for our breathable membrane products and raw materials for our HA products. Any interruption of our relationship with single-source suppliers or service providers could delay product shipments and materially harm our business.

 

Any New Business Acquisition Will Involve Uncertainty Relating to Integration 

 

We have acquired other businesses in the past and may make additional acquisitions in the future. The successful integration of new business acquisitions may require substantial effort from the Company's management. The diversion of the attention of management and any difficulties encountered in the transition process could have a material adverse effect on the Company's ability to realize the anticipated benefits of the acquisitions. The successful combination of new businesses also requires coordination of research and development activities, manufacturing, sales and marketing efforts. In addition, the process of combining organizations located in different geographic regions could cause the interruption of, or a loss of momentum in, the Company's activities. There can be no assurance that the Company will be able to retain key management, technical, sales and customer support personnel, or that the Company will realize the anticipated benefits of any acquisitions, and the failure to do so would have a material adverse effect on the Company's business, results of operations and financial condition.

  

 

We May Be Unable to Adequately Protect Our Intellectual Property Rights or May Infringe Intellectual Property Rights of Others

 

We may receive notices from third parties, including some of our competitors, claiming infringement by our products of their patent and other proprietary rights. Regardless of their merit, responding to any such claim could be time-consuming, result in costly litigation and require us to enter royalty and licensing agreements which may not be offered or available on terms acceptable to us. If a successful claim is made against us and we fail to develop or license a substitute technology, we could be required to alter our products or processes and our business, results of operations or financial position could be materially adversely affected. Our success depends in large part on our ability to obtain patents, maintain trade secret protection and operate without infringing on the proprietary rights of third parties. Any pending patent applications we file may not be approved and we may not be able to develop additional proprietary products that are patentable. Any patents issued to us may not provide us with competitive advantages or may be challenged by third parties. Patents held by others may prevent the commercialization of products incorporating our technology. Furthermore, others may independently develop similar products, duplicate our products or design around our patents.

 

Our Operations Are Subject to Regulations that Directly Impact Our Business

 

Our products and operations are subject to governmental regulation in the United States and foreign countries. The manufacture of our products is subject to periodic inspection by regulatory authorities. We may not be able to obtain necessary regulatory approvals on a timely basis or at all. Delays in receipt of or failure to receive approvals or loss of previously received approvals would have a material adverse effect on our business, financial condition and results of operations. Although we have no reason to believe that we will not be able to comply with all applicable regulations regarding the manufacture and sale of our products and polymer materials, regulations are always subject to change and depend heavily on administrative interpretations and the country in which the products are sold. Future changes in regulations or interpretations relating to matters such as safe working conditions, laboratory and manufacturing practices, environmental controls, and disposal of hazardous or potentially hazardous substances may adversely affect our business.

 

We are subject to FDA rules and regulations concerning the safety of the food products handled and sold by Apio, and the facilities in which they are packed and processed. Failure to comply with the applicable regulatory requirements can, among other things, result in:

 

fines, injunctions, civil penalties, and suspensions,

 

withdrawal of regulatory approvals,

 

product recalls and product seizures, including cessation of manufacturing and sales,

 

operating restrictions, and

 

criminal prosecution.

 

We may be required to incur significant costs to comply with the laws and regulations in the future which may have a material adverse effect on our business, operating results and financial condition.

 

Our food packaging products are subject to regulation under the FDC Act. Under the FDC Act, any substance that when used as intended may reasonably be expected to become, directly or indirectly, a component or otherwise affect the characteristics of any food may be regulated as a food additive unless the substance is generally recognized as safe. Food packaging materials are generally not considered food additives by the FDA because these products are not expected to become components of food under their expected conditions of use. We consider our breathable membrane product to be a food packaging material not subject to regulation or approval by the FDA. We have not received any communication from the FDA concerning our breathable membrane product. If the FDA were to determine that our breathable membrane products are food additives, we may be required to submit a food additive petition for approval by the FDA. The food additive petition process is lengthy, expensive and uncertain. A determination by the FDA that a food additive petition is necessary would have a material adverse effect on our business, operating results and financial condition.

 

Our Food Products Technology business is subject to the Perishable Agricultural Commodities Act (“PACA”). PACA regulates fair trade standards in the fresh produce industry and governs all the products sold by Apio. Our failure to comply with the PACA requirements could among other things, result in civil penalties, suspension or revocation of a license to sell produce, and in the most egregious cases, criminal prosecution, which could have a material adverse effect on our business.

  

 

Lifecore’s existing products and its products under development are considered to be medical devices and therefore, require clearance or approval by the FDA before commercial sales can be made in the United States. The products also require the approval of foreign government agencies before sales may be made in many other countries. The process of obtaining these clearances or approvals varies according to the nature and use of the product. It can involve lengthy and detailed safety, efficacy and clinical studies, as well as extensive site inspections and lengthy regulatory agency reviews. There can be no assurance that any of the Company’s clinical studies will show safety or effectiveness; that any of the Company’s products that require FDA clearance or approval will obtain such clearance or approval on a timely basis, on terms acceptable to the Company for the purpose of actually marketing the products, or at all; or that following any such clearance or approval previously unknown problems will not result in restrictions on the marketing of the products or withdrawal of clearance or approval.

 

In addition, most of the existing products being sold by Lifecore and its customers are subject to continued regulation by the FDA, various state agencies and foreign regulatory agencies which regulate manufacturing, labeling and record keeping procedures for such products. Marketing clearances or approvals by these agencies can be withdrawn due to failure to comply with regulatory standards or the occurrence of unforeseen problems following initial clearance or approval. These agencies can also limit or prevent the manufacture or distribution of Lifecore’s products. A determination that Lifecore is in violation of such regulations could lead to the imposition of civil penalties, including fines, product recalls or product seizures, injunctions, and, in extreme cases, criminal sanctions.

 

Federal, state and local regulations impose various environmental controls on the use, storage, discharge or disposal of toxic, volatile or otherwise hazardous chemicals and gases used in some of our manufacturing processes. Our failure to control the use of, or to restrict adequately the discharge of, hazardous substances under present or future regulations could subject us to substantial liability or could cause our manufacturing operations to be suspended and changes in environmental regulations may impose the need for additional capital equipment or other requirements.

 

We Depend on Strategic Partners and Licenses for Future Development

 

Our strategy for development, clinical and field testing, manufacture, commercialization and marketing for some of our current and future products includes entering into various collaborations with corporate partners, licensees and others. We are dependent on our corporate partners to develop, test, manufacture and/or market some of our products. Although we believe that our partners in these collaborations have an economic motivation to succeed in performing their contractual responsibilities, the amount and timing of resources to be devoted to these activities are not within our control. Our partners may not perform their obligations as expected or we may not derive any additional revenue from the arrangements. Our partners may not pay any additional option or license fees to us or may not develop, market or pay any royalty fees related to products under such agreements. Moreover, some of the collaborative agreements provide that they may be terminated at the discretion of the corporate partner, and some of the collaborative agreements provide for termination under other circumstances. Our partners may pursue existing or alternative technologies in preference to our technology. Furthermore, we may not be able to negotiate additional collaborative arrangements in the future on acceptable terms, if at all, and our collaborative arrangements may not be successful.

 

Our Reputation and Business May Be Harmed if Our Computer Network Security or Any of the Databases Containing Our Trade Secrets, Proprietary Information or the Personal Information of Our Employees Are Compromised, Which Could Cause a Material Adverse Effect on Our Results of Operations.

 

Cyber attacks or security breaches could compromise our confidential business information, cause a disruption in the Company’s operations or harm our reputation. We maintain numerous information assets, including intellectual property, trade secrets and other sensitive information critical to the operation and success of our business on computer networks, and such information may be compromised in the event that the security of such networks is breached. We also maintain confidential information regarding our employees and job applicants, including personal identification information. The protection of employee and company data in the information technology systems we utilize (including those maintained by third-party providers) is critical. Despite the efforts by us to secure computer networks utilized for our business, security could be compromised, confidential information, such as Company information assets and personally identifiable employee information, could be misappropriated or system disruptions could occur.

  

 

In addition, we may not have the resources or technical sophistication to anticipate or prevent rapidly evolving types of cyber attacks. Attacks may be targeted at us, our customers or others who have entrusted us with information. Actual or anticipated attacks may cause us to incur increasing costs, including costs to deploy additional personnel and protection technologies, train employees and engage third-party experts and consultants. Advances in computer capabilities, new technological discoveries or other developments may result in the technology used by us to protect sensitive Company data being breached or compromised. Furthermore, actual or anticipated cyber attacks or data breaches may cause significant disruptions to our network operations, which may impact our ability to deliver shipments or respond to customer needs in a timely or efficient manner.

 

Data and security breaches could also occur as a result of non-technical issues, including an intentional or inadvertent breach by our employees or by persons with whom we have commercial relationships that result in the unauthorized release of confidential information related to our business or personal information of our employees. Any compromise or breach of our computer network security could result in a violation of applicable privacy and other laws, costly investigations and litigation and potential regulatory or other actions by governmental agencies. As a result of any of the foregoing, we could experience adverse publicity, the compromise of valuable information assets, loss of sales, the cost of remedial measures and/or significant expenditures to reimburse third parties for resulting damages, any of which could adversely impact our brand, our business and our results of operations. 

 

The Global Economy is Experiencing Continued Volatility, Which May Have an Adverse Effect on Our Business

 

In recent years, the U.S. and international economy and financial markets experienced a significant slowdown and volatility due to uncertainties related to the availability of credit, energy prices, difficulties in the banking and financial services sectors, softness in the housing market, diminished market liquidity, geopolitical conflicts, falling consumer confidence and high unemployment rates. Ongoing volatility in the economy and financial markets could further lead to reduced demand for our products, which in turn, would reduce our revenues and adversely affect our business, financial condition and results of operations. In particular, volatility in the global markets have resulted in softer demand and more conservative purchasing decisions by customers, including a tendency toward lower-priced products, which could negatively impact our revenues, gross margins and results of operations. In addition to a reduction in sales, our profitability may decrease because we may not be able to reduce costs at the same rate as our sales decline. We cannot predict the ultimate severity or length of the current period of volatility, whether the recent signs of economic recovery will prove sustainable, or the timing or severity of future economic or industry downturns.

 

Given the current uncertain economic environment, our customers, suppliers and partners may have difficulties obtaining capital at adequate or historical levels to finance their ongoing business and operations, which could impair their ability to make timely payments to us. This may result in lower sales and/or inventory that may not be saleable or bad debt expense for Landec. In addition to the impact of the current market uncertainty on our customers, some of our vendors and growers may experience a reduction in their availability of funds and cash flows, which could negatively impact their business as well as ours. A further worsening of the economic environment or continued or increased volatility of the U.S. economy, including increased volatility in the credit markets, could adversely impact our customers’ and vendors’ ability or willingness to conduct business with us on the same terms or at the same levels as they have historically. Further, this economic volatility and uncertainty about future economic conditions makes it challenging for Landec to forecast its operating results, make business decisions, and identify the risks that may affect its business, sources and uses of cash, financial condition and results of operations.

 

Our International Sales May Expose Our Business to Additional Risks

 

For fiscal year 2015, approximately 30% of our total revenues were derived from product sales to international customers. A number of risks are inherent in international transactions. International sales and operations may be limited or disrupted by any of the following:

 

regulatory approval process,

 

government controls,

  

 

export license requirements,

 

political instability,

 

price controls,

 

trade restrictions,

 

changes in tariffs, or

 

difficulties in staffing and managing international operations.

 

Foreign regulatory agencies have or may establish product standards different from those in the United States, and any inability on our part to obtain foreign regulatory approvals on a timely basis could have a material adverse effect on our international business, and our financial condition and results of operations. While our foreign sales are currently priced in dollars, fluctuations in currency exchange rates may reduce the demand for our products by increasing the price of our products in the currency of the countries in which the products are sold. Regulatory, geopolitical and other factors may adversely impact our operations in the future or require us to modify our current business practices.

 

Cancellations or Delays of Orders by Our Customers May Adversely Affect Our Business

 

During fiscal year 2015, sales to our top five customers accounted for approximately 46% of our revenues, with our two largest customers from our Food Products Technology segment, Costco and Wal-mart accounting for approximately 21% and 11%, respectively, of our revenues. We expect that, for the foreseeable future, a limited number of customers may continue to account for a substantial portion of our revenues. We may experience changes in the composition of our customer base as we have experienced in the past. The reduction, delay or cancellation of orders from one or more major customers for any reason or the loss of one or more of our major customers could materially and adversely affect our business, operating results and financial condition. In addition, since some of the products processed by Apio and Lifecore are sole sourced to customers, our operating results could be adversely affected if one or more of our major customers were to develop other sources of supply. Our current customers may not continue to place orders, orders by existing customers may be canceled or may not continue at the levels of previous periods or we may not be able to obtain orders from new customers.

 

Our Sale of Some Products May Expose Us to Product Liability Claims

 

The testing, manufacturing, marketing, and sale of the products we develop involve an inherent risk of allegations of product liability. If any of our products were determined or alleged to be contaminated or defective or to have caused a harmful accident to an end-customer, we could incur substantial costs in responding to complaints or litigation regarding our products and our product brand image could be materially damaged. Such events may have a material adverse effect on our business, operating results and financial condition. Although we have taken and intend to continue to take what we consider to be appropriate precautions to minimize exposure to product liability claims, we may not be able to avoid significant liability. We currently maintain product liability insurance. While we think the coverage and limits are consistent with industry standards, our coverage may not be adequate or may not continue to be available at an acceptable cost, if at all. A product liability claim, product recall or other claim with respect to uninsured liabilities or in excess of insured liabilities could have a material adverse effect on our business, operating results and financial condition.

 

Our Stock Price May Fluctuate in Response to Various Conditions, Many of Which Are Beyond Our Control

 

The market price of our common stock may fluctuate significantly in response to numerous factors, many of which are beyond our control, including the following:

 

technological innovations applicable to our products,

 

our attainment of (or failure to attain) milestones in the commercialization of our technology,

 

our development of new products or the development of new products by our competitors,

  

new patents or changes in existing patents applicable to our products,

 

 

our acquisition of new businesses or the sale or disposal of a part of our businesses,

 

development of new collaborative arrangements by us, our competitors or other parties,

 

changes in government regulations applicable to our business,

 

changes in investor perception of our business,

 

fluctuations in our operating results, and

 

changes in the general market conditions in our industry.

 

Fluctuations in our quarterly results may, particularly if unforeseen, cause us to miss projections which might result in analysts or investors changing their valuation of our stock.

 

Lapses in Disclosure Controls and Procedures or Internal Control Over Financial Reporting Could Materially and Adversely Affect the Company’s Operations, Profitability or Reputation.

 

We are committed to maintaining high standards of internal control over financial reporting and disclosure controls and procedures. Nevertheless, lapses or deficiencies in disclosure controls and procedures or in our internal control over financial reporting may occur from time to time. On January 2, 2013, we reported that our audit committee reached a determination to restate our previously-filed interim financial statements for the quarter ended August 26, 2012 and that our previously-filed interim financial statements for the quarter ended August 26, 2012 should not be relied upon. We also reported management’s determination that a material weakness existed in our internal control over financial reporting at August 26, 2012. As a result of the material weakness, management also concluded that our disclosure controls and procedures were not effective at August 26, 2012.

 

There can be no assurance that our disclosure controls and procedures will be effective in preventing a material weakness or significant deficiency in internal control over financial reporting from occurring in the future. Any such lapses or deficiencies may materially and adversely affect our business and results of operations or financial condition, restrict our ability to access the capital markets, require us to expend resources to correct the lapses or deficiencies, expose us to regulatory or legal proceedings, harm our reputation, or otherwise cause a decline in investor confidence. 

 

We May Be Exposed to Employment Related Claims and Costs that Could Materially Adversely Affect Our Business

 

We have been subject in the past, and may be in the future, to claims by employees based on allegations of discrimination, negligence, harassment and inadvertent employment of undocumented workers or unlicensed personnel, and we may be subject to payment of workers' compensation claims and other similar claims. We could incur substantial costs and our management could spend a significant amount of time responding to such complaints or litigation regarding employee claims, which may have a material adverse effect on our business, operating results and financial condition.

 

We Are Dependent on Our Key Employees and if One or More of Them Were to Leave, We Could Experience Difficulties in Replacing Them, Efficiently or Effectively Transitioning Their Replacements and Our Operating Results Could Suffer

 

The success of our business depends to a significant extent on the continued service and performance of a relatively small number of key senior management, technical, sales, and marketing personnel. It has been announced that in October 2015 Molly Hemmeter, Landec’s current COO, will become the new CEO of the Company, succeeding Gary Steele, who has served as the Company’s CEO since September 1991 and is retiring as CEO, but will remain on the Company’s Board of Directors. The loss of any of our key personnel for an extended period would likely harm our business. In addition, competition for senior level personnel with knowledge and experience in our different lines of business is intense. If any of our key personnel were to leave, we would need to devote substantial resources and management attention to replace them. As a result, management attention may be diverted from managing our business, and we may need to pay higher compensation to replace these employees.

 

  

We May Issue Preferred Stock with Preferential Rights that Could Affect Your Rights

 

The issuance of shares of preferred stock could have the effect of making it more difficult for a third party to acquire a majority of our outstanding stock, and the holders of such preferred stock could have voting, dividend, liquidation and other rights superior to those of holders of our Common Stock.

 

We Have Never Paid any Dividends on Our Common Stock

 

We have not paid any dividends on our Common Stock since inception and do not expect to in the foreseeable future. Any dividends may be subject to preferential dividends payable on any preferred stock we may issue.

 

Our Profitability Could Be Materially and Adversely Affected if it Is Determined that the Book Value of Goodwill is Higher than Fair Value

 

Our balance sheet includes an amount designated as “goodwill” that represents a portion of our assets and our stockholders’ equity. Goodwill arises when an acquirer pays more for a business than the fair value of the tangible and separately measurable intangible net assets. In accordance with accounting guidance, goodwill is tested for impairment at least annually and more frequently if circumstances indicate a possible impairment. If we determine at any time in the future that the book value of goodwill is higher than fair value then the difference must be written off, which could materially and adversely affect our reported profitability.

 

Item 1B. Unresolved Staff Comments

 

None.

 

Item 2.     Properties

 

As of May 31, 2015, the Company owned or leased properties in Menlo Park, Arroyo Grande and Guadalupe California; Chaska, Minnesota; Bowling Green and McClure, Ohio; Hanover, Pennsylvania; Vero Beach, Florida; Rock Hill, South Carolina and Rock Tavern, New York as described below.

 

Location		Business Segment		Ownership		Facilities		Acres of Land		Lease Expiration
Menlo Park, CA		Corporate		Leased		14,600 square feet of office and laboratory space		—		12/31/16
Chaska, MN		HA-based Biomaterials		Owned		114,000 square feet of office, laboratory and manufacturing space		27.5		—
Guadalupe, CA		Food Products Technology		Owned		199,000 square feet of office space, manufacturing and cold storage		17.7		—
Bowling Green, OH		Food Products Technology		Owned		55,900 square feet of office space, manufacturing and cold storage		7.7		—
Hanover, PA		Food Products Technology		Owned		18,700 square feet of office space, manufacturing and cold storage		15.3		—
Vero Beach, FL		Food Products Technology		Leased		9,200 square feet of office space, manufacturing and cold storage		—		12/31/17
Rock Hill, SC		Food Products Technology		Owned		16,400 square feet of cold storage and office space		3.6		—
Rock Tavern, NY		Food Products Technology		Leased		7,700 square feet of cold storage and office space		—		8/23/23
McClure, OH		Food Products Technology		Leased		Farm land		185		12/31/17
Guadalupe, CA		Food Products Technology		Leased		105,000 square feet of parking space		2.4		9/30/18
Guadalupe, CA		Food Products Technology		Leased		5,300 square feet of office space		—		5/31/17
Arroyo Grande, CA		Food Export		Leased		1,100 square feet of office space		—		Month-to- Month

 

The obligations of the Company under its credit agreement with BMO Harris Bank N.A. (“BMO Harris”) are secured by a lien on the Chaska, MN land and building. The obligations of the Company under its credit agreement with General Electric Capital Corporation (“General Electric”) are secured by a lien on all of the land and buildings of the Food Products Technology segment.

 

Item 3.     Legal Proceedings

 

As of the date of this report, the Company is not a party to any legal proceedings.

 

Item 4.     Mine Safety Disclosures

 

Not applicable.

 

 

PART II

 

Item 5.     Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

 

Market Information

 

The Common Stock is traded on The NASDAQ Global Select Market under the symbol “LNDC”. The following table sets forth for each period indicated the high and low sales prices for the Common Stock.

 

Fiscal Year Ended May 31, 2015		High				Low
4th Quarter ending May 31, 2015		$	15.16			$	13.38
3rd Quarter ending March 1, 2015		$	14.73			$	12.66
2nd Quarter ending November 30, 2014		$	13.64			$	10.75
1st Quarter ending August 31, 2014		$	13.26			$	11.15

 

Fiscal Year Ended May 25, 2014		High				Low
4th Quarter ending May 25, 2014		$	12.16			$	10.19
3rd Quarter ending February 23, 2014		$	12.62			$	10.08
2nd Quarter ending November 24, 2013		$	13.57			$	11.34
1st Quarter ending August 25, 2013		$	15.82			$	13.21

 

Holders

 

There were approximately 48 holders of record of 27,009,342 shares of outstanding Common Stock as of July 17, 2015. Since certain holders are listed under their brokerage firm’s names, the actual number of stockholders is higher.

 

Dividends

 

The Company has not paid any dividends on the Common Stock since its inception. The Company presently intends to retain all future earnings, if any, for its business and does not anticipate paying cash dividends on its Common Stock in the foreseeable future.

 

Issuer Purchases of Equity Securities

 

There were no shares repurchased by the Company during fiscal years 2015 or 2014. The Company may still repurchase up to $3.8 million of the Company’s Common Stock under the Company’s stock repurchase plan announced on July 14, 2010.

 

Item 6.     Selected Financial Data

 

The information set forth below is not necessarily indicative of the results of future operations and should be read in conjunction with the information contained in Item 7 – “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and the Consolidated Financial Statements and Notes to Consolidated Financial Statements contained in Item 8 of this report.

  

 

		Year Ended May 31, 2015				Year Ended May 25, 2014				Year Ended May 26, 2013				Year Ended May 27, 2012				Year Ended May 29, 2011
Statement of Income Data:
(in thousands)
Product sales		$	539,257			$	476,813			$	441,708			$	317,552			$	276,729
Cost of product sales			473,850				414,249				378,948				265,414				230,034
Gross profit			65,407				62,564				62,760				52,138				46,695
Operating costs and expenses:
Research and development			6,988				7,204				9,294				9,625				9,275
Selling, general and administrative			39,958				35,170				32,531				26,515				24,608
Other operating (income)/expenses			—				—				(3,933	)			1,421				4,780
Total operating costs and expenses			46,946				42,374				37,892				37,561				38,663
Operating profit			18,461				20,190				24,868				14,577				8,032
Dividend income			1,417				1,125				1,125				1,125				328
Interest income			315				260				179				180				430
Interest expense and other			(1,829	)			(1,650	)			(2,008	)			(929	)			(820	)
Other income			3,107				10,000				8,100				5,331				472
Net income before taxes			21,471				29,925				32,264				20,284				8,442
Income tax expense			(7,746	)			(10,583	)			(9,452	)			(7,185	)			(4,181	)
Consolidated net income			13,725				19,342				22,812				13,099				4,261
Non-controlling interest			(181	)			(197	)			(225	)			(403	)			(341	)
Net income applicable to common stockholders		$	13,544			$	19,145			$	22,587			$	12,696			$	3,920
Basic net income per share		$	0.50			$	0.72			$	0.87			$	0.49			$	0.15
Diluted net income per share		$	0.50			$	0.71			$	0.85			$	0.49			$	0.15
Shares used in per share computation:
Basic			26,884				26,628				25,830				25,849				26,397
Diluted			27,336				27,120				26,626				26,126				26,626

 

		May 31, 2015				May 25, 2014				May 26, 2013				May 27, 2012				May 29, 2011
Balance Sheet Data:
(in thousands)
Cash and cash equivalents		$	14,127			$	14,243			$	13,718			$	22,177			$	8,135
Total assets			346,465				313,623				290,942				277,692				206,312
Long-term debt			42,519				34,372				40,305				47,317				19,830
Retained earnings			85,098				71,554				52,409				29,822				17,126
Total stockholders’ equity		$	218,432			$	203,069			$	178,693			$	149,742			$	136,055

 

Item 7.     Management’s Discussion and Analysis of Financial Condition and Results of Operations

 

The following discussion should be read in conjunction with the Company’s Consolidated Financial Statements contained in Item 8 of this report. Except for the historical information contained herein, the matters discussed in this report are forward-looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934. These forward-looking statements involve certain risks and uncertainties that could cause actual results to differ materially from those in the forward-looking statements. Potential risks and uncertainties include, without limitation, those mentioned in this report and, in particular, the factors described in Item 1A. "Risk Factors.” Landec undertakes no obligation to revise any forward-looking statements in order to reflect events or circumstances that may arise after the date of this report.

  

 

Overview

 

Landec Corporation and its subsidiaries (“Landec” or the “Company”) design, develop, manufacture and sell differentiated products for food and biomaterials markets and license technology applications to partners. The Company has two proprietary polymer technology platforms: 1) Intelimer polymers, and 2) hyaluronan (“HA”) biopolymers. The Company’s HA biopolymers are proprietary in that they are specially formulated for specific customers to meet strict regulatory requirements. The Company’s polymer technologies, along with its customer relationships and trade names, are the foundation, and a key differentiating advantage upon which Landec has built its business. The Company sells specialty packaged branded Eat Smart and GreenLine and private label fresh-cut vegetables and whole produce to retailers, club stores and foodservice operators, primarily in the United States, Canada and Asia through its Apio, Inc. (“Apio”) subsidiary and sells HA-based biomaterials through its Lifecore Biomedical, Inc. (“Lifecore”) subsidiary.

 

Landec has three operating segments – Food Products Technology, Food Export, and HA-based Biomaterials. The Food Products Technology segment combines the Company’s BreatheWay packaging technology with Apio’s branded Eat Smart and GreenLine and private label fresh-cut and whole produce business. The Food Export business is operated through Apio’s Cal-Ex export company which purchases and sells whole fruit and vegetable products to predominantly Asian markets. The HA-based Biomaterials business sells products utilizing HA in the ophthalmic, orthopedic and veterinary segments and also supplies HA to customers pursuing other medical applications, such as aesthetic surgery, medical device coatings, tissue engineering and pharmaceuticals. See "Business - Description of Business Segments".

 

As of May 31, 2015, the Company’s retained earnings were $85 million. The Company may incur losses in the future. The amount of future net profits, if any, is uncertain and there can be no assurance that the Company will be able to sustain profitability in future years.

 

Critical Accounting Policies and Use of Estimates

 

Use of Estimates

 

The preparation of financial statements in conformity with U.S. generally accepted accounting principles requires management to make certain estimates and judgments that affect the amounts reported in the financial statements and accompanying notes. The accounting estimates that require management’s most significant and subjective judgments include revenue recognition; sales returns and allowances; self insurance liabilities; recognition and measurement of current and deferred income tax assets and liabilities; the assessment of recoverability of long-lived assets; the valuation of intangible assets and inventory; the valuation of investments; and the valuation and recognition of stock-based compensation.

 

These estimates involve the consideration of complex factors and require management to make judgments. The analysis of historical and future trends can require extended periods of time to resolve, and are subject to change from period to period. The actual results may differ from management’s estimates.

 

Allowance for Doubtful Accounts

 

The Company maintains allowances for doubtful accounts for estimated losses resulting from the inability of its customers to make required payments. The allowance for doubtful accounts is based on review of the overall condition of accounts receivable balances and review of significant past due accounts. If the financial condition of the Company’s customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required.

 

Inventories

 

Inventories are stated at the lower of cost or market. If the cost of the inventories exceeds their expected market value, provisions are recorded currently for the difference between the cost and the market value. These provisions are determined based on specific identification for unusable inventory and an additional reserve, based on historical losses, for inventory currently considered to be usable.

  

 

Revenue Recognition

 

Revenue from product sales is recognized when there is persuasive evidence that an arrangement exists, title has transferred, the price is fixed and determinable, and collectability is reasonably assured. Allowances are established for estimated uncollectible amounts, product returns, and discounts based on specific identification and historical losses.

 

Apio’s Food Products Technology revenues generally consist of revenues generated from the sale of specialty packaged fresh-cut and whole value-added processed vegetable products that are generally washed and packaged in our proprietary packaging and sold under Apio’s Eat Smart and GreenLine brands and various private labels. Revenue is generally recognized upon shipment of these products to customers. The Company takes title to all produce it trades and/or packages, and therefore, records revenues and cost of sales at gross amounts in the Consolidated Statements of Comprehensive Income.

 

In addition, Food Products Technology value-added revenues include the revenues generated from Apio Cooling, LP, a vegetable cooling operation in which Apio is the general partner with a 60% ownership position and from the sale of BreatheWay packaging to license partners. Revenue is recognized on the vegetable cooling operations as cooling and storage services are provided to our customers. Sales of BreatheWay packaging are recognized when shipped to our customers.

 

Apio’s Food Export revenues consist of revenues generated from the purchase and sale of primarily whole commodity fruit and vegetable products to Asia by Cal-Ex. As most Cal-Ex customers are in countries outside of the U.S., title transfers and revenue is generally recognized upon arrival of the shipment in the foreign port. Apio records revenue equal to the sale price to third parties because it takes title to the product while in transit.

 

Our HA-based Biomaterials business principally generates revenue through the sale of products containing HA. Lifecore primarily sells products to customers in three medical areas: (1) Ophthalmic, which represented approximately 60% of Lifecore’s revenues in fiscal year 2015, (2) Orthopedic, which represented approximately 20% of Lifecore’s revenues in fiscal year 2015 and (3) Veterinary/Other. The vast majority of revenues from our HA-based Biomaterials business are recognized upon shipment.

 

Lifecore’s business development revenues, a portion of which are included in all three medical areas, are related to contract research and development (R&D) services and multi-element arrangement services with customers where the Company provides products and/or services in a bundled arrangement.

 

Contract R&D revenue is recorded as earned, based on the performance requirements of the contract. Non-refundable contract fees for which no further performance obligations exist, and there is no continuing involvement by the Company, are recognized on the earlier of when the payment is received or collection is assured.

 

For sales arrangements that contain multiple elements, the Company splits the arrangement into separate units of accounting if the individually delivered elements have value to the customer on a standalone basis. The Company also evaluates whether multiple transactions with the same customer or related party should be considered part of a multiple element arrangement, whereby the Company assesses, among other factors, whether the contracts or agreements are negotiated or executed within a short time frame of each other or if there are indicators that the contracts are negotiated in contemplation of each other. The Company then allocates revenue to each element based on a selling price hierarchy. The relative selling price for a deliverable is based on its vendor-specific objective evidence (VSOE), if available, third-party evidence (TPE), if VSOE is not available, or estimated selling price, if neither VSOE nor TPE is available. The Company then recognizes revenue on each deliverable in accordance with its policies for product and service revenue recognition. The Company is not typically able to determine VSOE or TPE, and therefore, uses the estimated selling price to allocate revenue between the elements of an arrangement.

  

 

The Company limits the amount of revenue recognition for delivered elements to the amount that is not contingent on the future delivery of products or services or future performance obligations or subject to customer-specific cancellation rights. The Company evaluates each deliverable in an arrangement to determine whether they represent separate units of accounting. A deliverable constitutes a separate unit of accounting when it has stand-alone value, and for an arrangement that includes a general right of return relative to the delivered products or services, delivery or performance of the undelivered product or service is considered probable and is substantially controlled by the Company. The Company considers a deliverable to have stand-alone value if the product or service is sold separately by the Company or another vendor or could be resold by the customer. Further, the revenue arrangements generally do not include a general right of return relative to the delivered products. Where the aforementioned criteria for a separate unit of accounting are not met, the deliverable is combined with the undelivered element(s) and treated as a single unit of accounting for the purposes of allocation of the arrangement consideration and revenue recognition. The Company allocates the total arrangement consideration to each separable element of an arrangement based upon the relative selling price of each element. Allocation of the consideration is determined at arrangement inception on the basis of each unit’s relative selling price. In instances where the Company has not established fair value for any undelivered element, revenue for all elements is deferred until delivery of the final element is completed and all recognition criteria are met.

 

Licensing revenue is recognized in accordance with prevailing accounting guidance. Initial license fees are deferred and amortized to revenue over the period of the agreement when a contract exists, the fee is fixed and determinable, and collectability is reasonably assured. Noncancellable, nonrefundable license fees are recognized over the period of the agreement, including those governing research and development activities and any related supply agreement entered into concurrently with the license when the risk associated with commercialization of a product is non-substantive at the outset of the arrangement.

 

From time to time, the Company offers customers sales incentives, which include volume rebates and discounts. These amounts are estimated on a quarterly basis and recorded as a reduction of revenue.

 

A summary of revenues by type of revenue arrangement as described above is as follows (in thousands):

 

		Year ended May 31, 2015				Year ended May 25, 2014				Year ended May 26, 2013
Recorded upon shipment		$	465,484			$	398,938			$	359,518
Recorded upon acceptance in foreign port			67,714				69,710				78,442
Revenue from multiple element arrangements			4,253				6,811				1,773
Revenue from license fees, R&D contracts and royalties/profit sharing			1,806				1,354				1,975
Total		$	539,257			$	476,813			$	441,708

 

Goodwill and Other Intangibles

 

The Company’s intangible assets are comprised of customer relationships with an estimated useful life of twelve to thirteen years and trademarks/trade names and goodwill with indefinite lives (collectively, “intangible assets”), which the Company recognized in accordance with accounting guidance (i) upon the acquisition of GreenLine by Apio in April 2012, (ii) upon the acquisition of Lifecore in April 2010 and (iii) upon the acquisition of Apio in December 1999. Accounting guidance defines goodwill as “the excess of the cost of an acquired entity over the net of the estimated fair values of the assets acquired and the liabilities assumed at date of acquisition.” All intangible assets, including goodwill, associated with the acquisition of Lifecore was allocated to our HA-based Biomaterials reporting unit and the acquisitions of Apio and GreenLine were allocated to our Food Products Technology reporting unit pursuant to accounting guidance based upon the allocation of assets and liabilities acquired and consideration paid for each reporting unit. As of May 31, 2015, the HA-based Biomaterials reporting unit had $13.9 million of goodwill and the Food Products Technology reporting unit had $35.7 million of goodwill.

 

The Company tests its indefinite-lived intangible assets for impairment at least annually, in accordance with accounting guidance. For all indefinite-lived assets, including goodwill, the Company performs a qualitative analysis in accordance with ASC 350-30-35. Application of the impairment tests for indefinite-lived intangible assets requires significant judgment by management, including identification of reporting units, assignment of assets and liabilities to reporting units, assignment of intangible assets to reporting units which judgments are inherently uncertain.

  

 

During the fiscal quarter ended February 23, 2014, the Company voluntarily changed the date of its annual goodwill and indefinite-lived intangible assets impairment testing from the last day of the fiscal month in July to the first day of the fiscal fourth quarter. This voluntary change was preferable under the circumstances as it provides the Company with additional time to complete its annual goodwill and indefinite-lived intangible asset impairment testing in advance of its year-end reporting and results in better alignment with the Company’s strategic planning and forecasting process. This change was not applied retrospectively as it is impracticable to do so because retrospective application would require application of significant estimates and assumptions with the use of hindsight. Accordingly, the change was applied prospectively.

 

The Company tested its indefinite-lived intangible assets, including goodwill, for impairment as of March 2, 2015 and determined that no adjustments to the carrying values of these assets were necessary as of that date. As a result, it was not necessary to perform the two-step quantitative goodwill impairment test at the time. Subsequent to the 2015 annual impairment test, there have been no significant events or circumstances affecting the valuation of goodwill. As of May 31, 2015, there were no events or changes in circumstances that indicated that the carrying amount of intangible assets may not be recoverable or that goodwill should be tested for impairment. Therefore, there was no impairment to the carrying value of the Company's goodwill. There were no impairment losses for goodwill during fiscal years 2014 and 2013.

 

On a quarterly basis, the Company considers the need to update its most recent annual tests for possible impairment of its indefinite-lived intangible assets, based on management’s assessment of changes in its business and other economic factors since the most recent annual evaluation. Such changes, if significant or material, could indicate a need to update the most recent annual tests for impairment of the indefinite-lived intangible assets during the current period. The results of these tests could lead to write-downs of the carrying values of these assets in the current period.

 

In the annual impairment test, the Company first assesses qualitative factors to determine whether it is necessary to perform the two-step quantitative goodwill impairment test. In assessing the qualitative factors, management considers the impact of these key factors: macro-economic conditions, industry and market environment, overall financial performance of the Company, cash flow from operating activities, market capitalization and stock price. If management determines as a result of the qualitative assessment that it is more likely than not (that is, a likelihood of more than 50 percent) that the fair value of a reporting unit is less than its carrying amount, then the quantitative test is required. Otherwise, no further testing is required.

 

If a quantitative test is required, the Company compares the fair value of indefinite-lived intangible assets to its carrying value including goodwill. The Company determines the fair value using both an income approach and a market approach. Under the income approach, fair value is determined based on estimated future cash flows, discounted by an estimated weighted-average cost of capital, which reflects the overall level of inherent risk of the Company and the rate of return an outside investor would expect to earn. Under the market-based approach, information regarding the Company is utilized as well as publicly available industry information to determine earnings multiples that are used to value each reporting unit. If the carrying value of the reporting unit exceeds its fair value, the Company will determine the amount of impairment loss by comparing the implied fair value of goodwill with the carrying value of goodwill. An impairment charge is recognized for the excess of the carrying value of goodwill over its implied fair value.

 

Income Taxes

 

The Company accounts for income taxes in accordance with accounting guidance which requires that deferred tax assets and liabilities be recognized using enacted tax rates for the effect of temporary differences between the book and tax basis of recorded assets and liabilities. The Company maintains valuation allowances when it is likely that all or a portion of a deferred tax asset will not be realized. Changes in valuation allowances from period to period are included in the Company’s income tax provision in the period of change. In determining whether a valuation allowance is warranted, the Company takes into account such factors as prior earnings history, expected future earnings, unsettled circumstances that, if unfavorably resolved, would adversely affect utilization of a deferred tax asset, carryback and carryforward periods, and tax strategies that could potentially enhance the likelihood of realization of a deferred tax asset. At May 31, 2015, the Company had a valuation allowance of $1.2 million against deferred tax assets.

  

  

In addition to valuation allowances, the Company establishes tax-contingency accruals for uncertain tax positions. The tax-contingency accruals are adjusted in light of changing facts and circumstances, such as the progress of tax audits, case law and emerging legislation. The Company recognizes interest and penalties related to uncertain tax positions as a component of income tax expense. The Company’s effective tax rate includes the impact of tax-contingency accruals as considered appropriate by management.

 

 

A number of years may elapse before a particular matter, for which the Company has accrued, is audited and finally resolved. The number of years with open tax audits varies by jurisdiction. While it is often difficult to predict the final outcome or the timing of resolution of any particular tax matter, the Company believes its tax-contingency accruals are adequate to address known tax contingencies. Favorable resolution of such matters could be recognized as a reduction to the Company’s effective tax rate in the year of resolution. Unfavorable settlement of any particular issue could increase the effective tax rate. Any resolution of a tax issue may require the use of cash in the year of resolution. The Company’s tax-contingency accruals are presented in the balance sheet within accrued liabilities.

 

Stock-Based Compensation

 

The Company’s stock-based awards include stock option grants and restricted stock unit awards (RSUs).

 

The estimated fair value for stock options, which determines the Company’s calculation of compensation expense, is based on the Black-Scholes pricing model. In addition, the accounting guidance requires the estimation of the expected forfeitures of stock-based awards at the time of grant. As a result, the Company uses historical data to estimate pre-vesting forfeitures and records stock-based compensation expense only for those awards that are expected to vest and revises those estimates in subsequent periods if the actual forfeitures differ from the prior estimates.

 

Fair Value Measurements

 

The Company uses fair value measurement accounting for financial assets and liabilities and for financial instruments and certain other items measured at fair value. The Company has elected the fair value option for its investment in a non-public company (see Note 2 to the Consolidated Financial Statements). The Company has not elected the fair value option for any of its other eligible financial assets or liabilities.

 

The accounting guidance established a three-tier hierarchy for fair value measurements, which prioritizes the inputs used in measuring fair value as follows:

 

Level 1 – observable inputs such as quoted prices for identical instruments in active markets.

 

Level 2 – inputs other than quoted prices in active markets that are observable either directly or indirectly through corroboration with observable market data.

 

Level 3 – unobservable inputs in which there is little or no market data, which would require the Company to develop its own assumptions.

 

As of May 31, 2015, the only asset of the Company that was measured at fair value on a recurring basis was its minority interest investment in Windset.

 

  

The Company has elected the fair value option of accounting for its investment in Windset. The calculation of fair value utilizes significant unobservable inputs in the discounted cash flow models, including projected cash flows, growth rates and discount rates. As a result, the Company’s investment in Windset is considered to be a Level 3 measurement investment. The change in the fair market value of the Company’s investment in Windset for the fiscal years ended May 31, 2015 and May 25, 2014 was due to the Company’s 26.9% and 20.1%, respectively, minority interest in the change in the fair market value of Windset during those periods. In determining the fair value of the investment in Windset, the Company utilizes the following significant unobservable inputs in the discounted cash flow models:

 

		At May 31, 2015				At May 25, 2014
Annual consolidated revenue growth rates			4	%			4	%
Annual consolidated expense growth rates			4	%			4	%
Consolidated income tax rates			15	%			15	%
Consolidated discount rates			15% to 21	%			16% to 22	%

     The revenue growth, expense growth and income tax rate assumptions, consider the Company's best estimate of the trends in those items over the discount period. The discount rate assumption takes into account the risk-free rate of return, the market equity risk premium and the company’s specific risk premium and then applies an additional discount for lack of marketability of the underlying securities. The discounted cash flow valuation model used by the Company has the following sensitivity to changes in inputs and assumptions (in thousands):

 

		Impact on value of Windset investment as of May 31, 2015
10% increase in revenue growth rates		$	2,300
10% increase in expense growth rates		$	(1,200	)
10% increase in income tax rates		$	(100	)
10% increase in discount rates		$	(1,500	)

 

Imprecision in estimating unobservable market inputs can affect the amount of gain or loss recorded for a particular position. The use of different methodologies or assumptions to determine the fair value of certain financial instruments could result in a different estimate of fair value at the reporting date.

 

The following table summarizes the fair value of the Company’s assets and liabilities that are measured at fair value on a recurring basis, as of May 31, 2015 and May 25, 2014 (in thousands):

 

		Fair Value at May 31, 2015												Fair Value at May 25, 2014
Assets:		Level 1				Level 2				Level 3				Level 1				Level 2				Level 3
Marketable securities		$	-			$	-			$	-			$	-			$	-			$	-
Investment in private company			-				-				61,500				-				-				39,600
Total		$	-			$	-			$	61,500			$	-			$	-			$	39,600
Liabilities:
Interest rate swap			-				-				-				-				44				-
Total		$	-			$	-			$	-			$	-			$	44			$	-

 

Recent Accounting Pronouncements

 

 

Debt Issuance Costs

 

In April 2015, the Financial Accounting Standards Board (“FASB”) issued Accounting Standard Update (“ASU”) No. 2015-03, Simplifying the Presentation of Debt Issuance Cost ("ASU 2015-03"), which requires that debt issuance costs related to a recognized debt liability be presented in the balance sheet as a direct deduction from the carrying amount of that debt liability, consistent with debt discounts. The new guidance is effective for the Company beginning in the fourth quarter of fiscal year 2016, with early adoption permitted. Management is currently evaluating the impact that adoption of ASU 2015-03 will have on the Company’s Consolidated Financial Statements and disclosures.

  

 

 

Revenue Recognition

 

In May 2014, the FASB issued ASU No. 2014-09, Revenue from Contracts with Customers (Topic 606) ("ASU 2014-09"), which outlines a single comprehensive model for entities to use in accounting for revenue arising from contracts with customers and supersedes most current revenue recognition guidance, including industry-specific guidance. The standard requires entities to recognize revenue to depict the transfer of promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. The new guidance also includes a cohesive set of disclosure requirements intended to provide users of financial statements with comprehensive information about the nature, amount, timing, and uncertainty of revenue and cash flows arising from a company’s contracts with customers. ASU 2014-09 will be effective beginning the first quarter of the Company's fiscal year 2019 and early application is not permitted. The standard allows for either “full retrospective” adoption, meaning the standard is applied to all of the periods presented, or “modified retrospective” adoption, meaning the standard is applied only to the most current period presented in the financial statements. Management is currently evaluating the effect ASU 2014-09 will have on the Company's Consolidated Financial Statements and disclosures.

 

Results of Operations

 

Fiscal Year Ended May 31, 2015 Compared to Fiscal Year Ended May 25, 2014

 

Revenues (in thousands):

 

		Fiscal Year ended May 31, 2015				Fiscal Year ended May 25, 2014				Change
Food Products Technology		$	430,415			$	360,728				19	%
Food Export			67,837				69,827				(3%	)
Total Apio			498,252				430,555				16	%
HA-based Biomaterials			40,432				45,704				(12%	)
Corporate			573				554				3	%
Total Revenues		$	539,257			$	476,813				13	%

 

Food Products Technology (Apio)

 

Apio’s Food Products Technology revenues consist of revenues generated from the sale of specialty packaged fresh-cut and whole value-added processed vegetable products that are washed and packaged in our proprietary packaging and sold under Apio’s Eat Smart and GreenLine brands and various private labels. In addition, Food Products Technology revenues include the revenues generated from Apio Cooling, LP, a vegetable cooling operation in which Apio is the general partner with a 60% ownership position and from the sale of BreatheWay packaging to license partners.

 

The increase in Apio's Food Products Technology revenues for the fiscal year ended May 31, 2015 compared to the same period last year was primarily due to a 12% increase in unit volume sales resulting primarily from new salad kit products which typically have a higher price per unit than historical offerings. In addition, fiscal year 2015 included an extra week compared to fiscal year 2014 as a result of the timing of the Company’s 2015 fiscal year end.

 

Food Export (Apio)

 

Apio’s Food Export revenues consist of revenues generated from the purchase and sale of primarily whole commodity fruit and vegetable products to Asia by Cal-Ex. Apio records revenue equal to the sale price to third parties because it takes title to the product while in transit.

 

The decrease in revenues in Apio’s Food Export business for the fiscal year ended May 31, 2015 compared with fiscal year 2014 was due to a 9% decrease in unit volume sales primarily as a result of a west coast longshoremans labor dispute which was partially offset by a favorable product mix to higher priced export products.

 

  

HA-based Biomaterials (Lifecore)

 

Lifecore principally generates revenue through the sale of products containing HA. Lifecore primarily sells products to customers in three medical areas: (1) Ophthalmic, which represented approximately 60% of Lifecore’s revenues in fiscal year 2015, (2) Orthopedic, which represented approximately 20% of Lifecore’s revenues in fiscal year 2015 and (3) Veterinary/Other.

 

The decrease in Lifecore's revenues for fiscal year 2015 compared to fiscal year 2014 was primarily due to a 29% decrease in revenues in Lifecore's fermentation business for Ophthalmic products as a result of lower shipments to a major customer as it aligns its inventory levels with newly stated corporate guidelines and a 25% decrease in business development revenues due to the delay in the timing of certain development activities.  These decreases were partially offset by increased aseptic filling revenues.

 

Corporate

 

Corporate revenues are generated from the licensing agreements with corporate partners.

 

The increase in Corporate revenues for fiscal year 2015 compared to the same period of last year was not significant.

 

Gross Profit (in thousands):

		Fiscal Year ended May 31, 2015				Fiscal Year ended May 25, 2014				Change
Food Products Technology		$	45,993			$	36,318				27	%
Food Export			4,252				5,340				(20%	)
Total Apio			50,245				41,658				21	%
HA-based Biomaterials			14,609				20,456				(29%	)
Corporate			553				450				23	%
Total Gross Profit		$	65,407			$	62,564				5	%

 

General

 

There are numerous factors that can influence gross profit including product mix, customer mix, manufacturing costs, volume, sale discounts and charges for excess or obsolete inventory, to name a few. Many of these factors influence or are interrelated with other factors. The Company includes in cost of sales all of the costs related to the sale of products in accordance with U.S. generally accepted accounting principles. These costs include the following: raw materials (including produce, seeds, packaging, syringes and fermentation and purification supplies), direct labor, overhead (including indirect labor, depreciation, and facility related costs) and shipping and shipping-related costs. The following are the primary reasons for the changes in gross profit for the fiscal year ended May 31, 2015 compared to the same period last year as outlined in the table above.

 

Food Products Technology (Apio)

 

The increase in gross profit for Apio’s Food Products Technology business for fiscal year 2015 compared to the same period last year was primarily due to the gross profit generated from the 19% increase in revenues and from a favorable product mix change to a greater percentage of revenues coming from higher margin salad kit products versus the lower margin core packaged vegetable products. In addition, fiscal year 2014 Apio’s Food Products Technology business experienced higher than expected raw produce sourcing costs due to a variety of factors, most importantly the heavy rains in the Midwest and along the East Coast and cooler than normal temperatures in California.

 

  

Food Export (Apio)

 

Apio’s Food Export business is a buy/sell business that typically realizes a gross margin in the 5-10% range.

 

The decrease in gross profit for Apio’s export business for fiscal year 2015 compared to the same period last year was due to a 3% decrease in revenues and from higher costs to source the higher priced export produce resulting in a lower gross profit as a percent of sales. The gross margin during fiscal year 2015 was 6.3% compared to a gross margin of 7.6% during the same period last year.

 

HA-based Biomaterials (Lifecore)

 

Lifecore operates in the medical devices industry and has historically realized an overall gross margin percentage of approximately 35-50%.

 

The decrease in gross profit during fiscal year 2015 compared to the same period last year was due to the 12% decrease in revenues and from an unfavorable product mix change to a higher percentage of sales being from the lower margin aseptically filled products compared to the higher margin fermentation products and business development revenues in the prior year.

 

Corporate

 

The decrease in Corporate gross profit for fiscal year 2015 compared to the same period last year was not significant.

 

Operating Expenses (in thousands):

 

		Fiscal Year ended May 31, 2015				Fiscal Year ended May 25, 2014				Change
Research and Development:
Apio		$	745			$	1,105				(33	%)
Lifecore			4,806				4,739				1	%
Corporate			1,437				1,360				6	%
Total R&D		$	6,988			$	7,204				(3	%)
Selling, General and Administrative:
Apio		$	27,380			$	22,860				20	%
Lifecore			4,057				4,251				(5	%)
Corporate			8,521				8,059				6	%
Total S,G&A		$	39,958			$	35,170				14	%

 

Research and Development

 

Landec’s research and development consisted primarily of product development and commercialization initiatives. Research and development efforts at Apio are focused on the Company’s proprietary BreatheWay membranes used for packaging produce, with a focus on extending the shelf-life of sensitive vegetables and fruit. In the Lifecore business, the research and development efforts are focused on new products and applications for HA and non-HA based biomaterials. For Corporate, the research and development efforts are primarily focused on supporting the development and commercialization of new products and new technologies in our food and HA businesses.

 

The decrease in R&D expenses for fiscal year 2015 compared to the same period last year was primarily due to a decrease in Apio R&D as products move from the development stage to commercialization offset by slight increases in R&D at Lifecore and Corporate.

 

 

Selling, General and Administrative (S,G&A)

 

Selling, general and administrative expenses consist primarily of sales and marketing expenses associated with Landec’s product sales and services, business development expenses and staff and administrative expenses.

 

The increase in S,G&A expenses for fiscal year 2015 compared to the same period last year was primarily due to a 20% increase in sales and marketing expenses at Apio primarily to promote our new salad kit products and from the addition of incremental headcount to assist in developing and promoting future products.

 

Non-operating income/(expense) (in thousands):

 

		Fiscal Year ended May 31, 2015				Fiscal Year ended May 25, 2014				Change
Dividend Income		$	1,417			$	1,125				26	%
Interest Income		$	315			$	260				21	%
Interest Expense		$	(1,829	)		$	(1,650	)			11	%
Other Income		$	3,107			$	10,000				(69	%)
Income Taxes		$	(7,746	)		$	(10,583	)			(27	%)
Non controlling Interest		$	(181	)		$	(197	)			(8	%)

 

Dividend Income

 

Dividend income is derived from the dividends accrued on our $22.0 million preferred stock investment in Windset which yields a cash dividend of 7.5% annually. The increase in dividend income for fiscal year 2015 compared to the same period last year was due to the Company increasing its preferred stock investment in Windset by $7.0 million on October 29, 2014.

 

Interest Income

 

The increase in interest income in fiscal year 2015 compared to fiscal year 2014 was not significant.

 

Interest Expense

 

The increase in interest expense during fiscal year 2015 compared to the same period last year was due to an $8.1 million net increase in long-term debt during fiscal year 2015.

 

Other Income

 

The decrease in other income for fiscal year 2015 was due to the change in the increase in the fair value of our Windset investment being lower in fiscal year 2015 compared to fiscal year 2014. In addition, other income during fiscal year 2015 included a $793,000 expense for the write off of the Company’s investment in Aesthetic Sciences, Inc.

 

Income Taxes

 

The decrease in the income tax expense for fiscal year 2015 was primarily due to a 28% decrease in net income before taxes compared to the same period last year.

 

Non controlling Interest

 

The non controlling interest consists of the limited partners’ equity interest in the net income of Apio Cooling, LP.

 

The decrease in non controlling interest for fiscal year 2015 compared to the same period last year was not significant.

  

 

Fiscal Year Ended May 25, 2014 Compared to Fiscal Year Ended May 26, 2013

 

Revenues (in thousands):

 

		Fiscal Year ended May 25, 2014				Fiscal Year ended May 26, 2013				Change
Food Products Technology		$	360,728			$	320,447				13	%
Food Export			69,827				78,568				(11	%)
Total Apio			430,555				399,015				8	%
HA-based Biomaterials			45,704				41,281				11	%
Corporate			554				1,412				(61	%)
Total Revenues		$	476,813			$	441,708				8	%

 

Food Products Technology (Apio)

 

Apio’s Food Products Technology revenues consist of revenues generated from the sale of specialty packaged fresh-cut and whole value-added processed vegetable products that are washed and packaged in our proprietary packaging and sold under Apio’s Eat Smart and GreenLine brands and various private labels. In addition, value-added revenues include the revenues generated from Apio Cooling, LP, a vegetable cooling operation in which Apio is the general partner with a 60% ownership position, and from the sale of BreatheWay packaging to license partners.

 

The increase in Apio's Food Products Technology revenues for the fiscal year ended May 25, 2014 compared to the same period last year was primarily due to a 8% increase in unit volume sales resulting primarily from expanded product offerings and a 10% unit volume increase in the fresh-cut vegetable category, according to Nielsen, coupled with new product introductions which typically have a higher price per unit than historical offerings.

 

Food Export (Apio)

 

Apio’s Food Export revenues consist of revenues generated from the purchase and sale of primarily whole commodity fruit and vegetable products to Asia by Cal-Ex. Apio records revenue equal to the sale price to third parties because it takes title to the product while in transit.

 

The decrease in revenues in Apio’s Food Export business for the fiscal year ended May 25, 2014 compared to the same period last year was due to a 6% decrease in unit volume sales primarily as a result of new Indonesian import quotas on fruit coupled with a product mix change to lower priced export items compared to fiscal year 2013.

 

HA-based Biomaterials (Lifecore)

 

Lifecore principally generates revenue through the sale of products containing HA. Lifecore primarily sells products to customers in three medical areas: (1) Ophthalmic, which represented approximately 60% of Lifecore’s revenues in fiscal year 2014, (2) Orthopedic, which represented approximately 20% of Lifecore’s revenues in fiscal year 2014 and (3) Veterinary/Other.

 

The increase in Lifecore’s revenues for fiscal year 2014 compared to the same period last year was due to a 32% increase in revenues in Lifecore’s aseptic filling business from increased sales to existing customers partially offset by a 13% decrease in fermentation sales.

 

Corporate

 

Corporate revenues are generated from the licensing agreements with corporate partners.

 

The decrease in Corporate revenues for fiscal year 2014 compared to the same period of last year was not significant.

 

 

Gross Profit (in thousands):

 

		Fiscal Year ended May 25, 2014				Fiscal Year ended May 26, 2013				Change
Food Products Technology		$	36,318			$	37,077				(2	%)
Food Export			5,340				5,274				1	%
Total Apio			41,658				42,351				(2	%)
HA-based Biomaterials			20,456				19,102				7	%
Corporate			450				1,307				(66	%)
Total Gross Profit		$	62,564			$	62,760				0	%

 

General

 

There are numerous factors that can influence gross profit including product mix, customer mix, manufacturing costs, volume, sale discounts and charges for excess or obsolete inventory, to name a few. Many of these factors influence or are interrelated with other factors. The Company includes in cost of sales all of the costs related to the sale of products in accordance with U.S. generally accepted accounting principles. These costs include the following: raw materials (including produce, seeds, packaging, syringes and fermentation and purification supplies), direct labor, overhead (including indirect labor, depreciation, and facility related costs) and shipping and shipping-related costs. The following are the primary reasons for the changes in gross profit for the fiscal year ended May 25, 2014 compared to the same period last year as outlined in the table above.

 

Food Products Technology (Apio)

 

The decrease in gross profit for the Food Products Technology business for fiscal year 2014 compared to the same period last year was primarily due to much higher than expected operating costs including higher labor costs to meet higher than expected volumes and higher raw produce sourcing costs during primarily the first six months of fiscal year 2014 resulting from lower yields and poor quality due to a variety of factors, most importantly the heavy rains in the Midwest and along the East Coast and large temperatures swings in California throughout most of the year. The higher operating costs reduced Apio’s gross profit by approximately $9.3 million during fiscal year 2014 which was partially offset by the gross profit generated from the 13% increase in revenues.       

 

Food Export (Apio)

 

Apio’s Food Export business is a buy/sell business that typically realizes a gross margin in the 5-8% range.

 

The increase in gross profit for Apio’s Food Export business for fiscal year 2014 compared to the same period last year was primarily due to favorable product mix changes to higher margin products, primarily into Indonesia, which resulted in a higher gross margin percentage during fiscal year 2014 of 7.6% compared to a gross margin percentage of 6.7% during fiscal year 2013. The favorable product mix was offset by the decrease in gross profit resulting from an 11% decrease in revenues.

 

HA-based Biomaterials (Lifecore)

 

Lifecore operates in the medical devices industry and has historically realized an overall gross margin percentage of approximately 35-50%.

 

The increase in gross profit for fiscal year 2014 compared to the same period last year was due to an 11%, or $4.4 million increase in revenues resulting from the increased sales of both historical products and new products to existing customers. The increase in gross profit from higher revenues was partially offset by an unfavorable product mix change to higher sales of lower margin aseptically filled products from higher margin fermentation sales.

 

  

Corporate

 

The decrease in Corporate gross profit for fiscal year 2014 compared to the same period last year was not significant.

 

Operating Expenses (in thousands):

 

		Fiscal Year ended May 25, 2014				Fiscal Year ended May 26, 2013				Change
Research and Development:
Apio		$	1,105			$	1,088				2	%
Lifecore			4,739				4,930				(4	%)
Corporate			1,360				3,276				(58	%)
Total R&D		$	7,204			$	9,294				(22	%)
Selling, General and Administrative:
Apio		$	22,860			$	21,976				4	%
Lifecore			4,251				4,595				(7	%)
Corporate			8,059				5,960				35	%
Total S,G&A		$	35,170			$	32,531				8	%
Other operating expenses:
Apio		$	—			$	(3,933	)		N/M
Total Other Operating Expenses		$	—			$	(3,933	)		N/M

 

Research and Development

 

Landec’s research and development consisted primarily of product development and commercialization initiatives. Research and development efforts at Apio are focused on the Company’s proprietary BreatheWay membranes used for packaging produce, with a focus on extending the shelf-life of sensitive vegetables and fruit. In the Lifecore business, the research and development efforts are focused on new products and applications for HA-based biomaterials. For Corporate, the research and development efforts are focused on supporting the development and commercialization of new products and new technologies in our food and HA businesses along with developing uses for our proprietary Intelimer polymers outside of our food and HA businesses.

 

The decrease in research and development expenses for fiscal year 2014 compared to last year was primarily due to a decrease in Corporate R&D because of the Company transitioning away from R&D and licensing collaborations to maintain focus on R&D efforts at its core food and HA businesses.

 

Selling, General and Administrative (S,G&A)

 

Selling, general and administrative expenses consist primarily of sales and marketing expenses associated with Landec’s product sales and services, business development expenses and staff and administrative expenses.

 

The increase in S,G&A expenses for fiscal year 2014 compared to the same period last year was primarily due to an increase in accounting and tax fees, public company costs and board of director fees in fiscal year 2014.

 

Other Operating Expenses

 

Other operating expenses in fiscal year 2013 consisted of a $3.9 million reversal of the earn-out liability at Apio associated with the GreenLine acquisition.

  

  

Non-operating income/(expense) (in thousands):

 

		Fiscal Year ended May 25, 2014				Fiscal Year ended May 26, 2013				Change
Dividend Income		$	1,125			$	1,125				—
Interest Income		$	260			$	179				45	%
Interest Expense		$	(1,650	)		$	(2,008	)			(18	%)
Other Income		$	10,000			$	8,100				23	%
Income Taxes		$	(10,583	)		$	(9,452	)			12	%
Non controlling Interest		$	(197	)		$	(225	)			(12	%)

 

Dividend Income

 

Dividend income is derived from the dividends accrued on our $15 million preferred stock investment in Windset which yields a cash dividend of 7.5% annually. There was no change in dividend income in fiscal year 2014 compared to fiscal year 2013.

 

Interest Income

 

The increase in interest income for the fiscal year 2014 compared to the same period last year was not significant.

 

Interest Expense

 

The decrease in interest expense during fiscal year 2014 compared to the same period last year was due to the Company paying down its debt by $9.9 million during fiscal year 2014.

 

Other Income

 

The increase in other income for fiscal year 2014 compared to the same period last year is primarily due to the change in the fair market value of our Windset investment being $1.9 million higher in fiscal year 2014 compared to the increase in fiscal year 2013.

 

Income Taxes

 

The increase in the income tax expense for fiscal year 2014 was due to an increase in the effective tax rate for fiscal year 2014 to 36% compared to 30% in fiscal year 2013. The effective tax rates for last year was lower than this year as a result of the $3.9 million earn out adjustment last year which was not subject to income tax. The increase in income taxes due to the increase in the effective tax rate was partially offset by a 7% decrease in net income before taxes compared to the same period last year.

 

Non controlling Interest

 

The non controlling interest consists of the limited partners’ equity interest in the net income of Apio Cooling, LP.

 

The decrease in non controlling interest for fiscal year 2014 compared to the same period last year was not significant.

 

Liquidity and Capital Resources

 

As of May 31, 2015, the Company had cash and cash equivalents of $14.1 million, a net decrease of $116,000 from $14.2 million at May 25, 2014.

 

 

Cash Flow from Operating Activities 

 

Landec generated $26.2 million of cash from operating activities during fiscal year 2015 compared to generating $21.0 million from operating activities during fiscal year 2014. The primary sources of cash from operating activities during fiscal year 2015 were from (1) $13.7 million of net income, (2) $8.7 million of depreciation/amortization and stock-based compensation expenses, (3) a $4.2 million net increase in deferred tax liabilities and (4) a net decrease of $3.3 million in working capital. Theses sources of cash were partially offset by the $3.9 million non-cash increase in the value of the Company’s investment in Windset.

 

The factors which decreased working capital during fiscal year 2015 were a $2.9 million increase in accounts payable due mainly to a $2.0 million increase at Apio due to costs from operations being $5.1 million higher in May 2015 compared to May 2014 and a $2.6 million increase in accrued compensation primarily from bonuses earned at Apio and Corporate for achieving financial performance targets. These decreases in working capital were partially offset by a $1.8 million increase in accounts receivable primarily due to Apio’s May 2015 revenues being $5.2 million higher than May 2014 revenues and from a $2.2 million increase in prepaid expenses and other current assets due to a $2.5 million increase at Apio primarily due to increased prepayments for raw product.

 

Cash Flow from Investing Activities

 

Net cash used in investing activities for fiscal year 2015 was $34.4 million compared to $13.3 million for the same period last year. The primary uses of cash in investing activities during fiscal year 2015 were for the purchase of $17.5 million of facilities and equipment primarily to support the growth of the Apio value-added and Lifecore businesses and the purchase of additional Windset shares of common stock and preferred stock for $18.0 million.

 

Cash Flow from Financing Activities

 

Net cash provided by financing activities for fiscal year 2015 was $8.2 million compared to $7.2 million used in financing activities for the same period last year. The net cash provided by financing activities during fiscal year 2015 was primarily due to $15.0 million of proceeds from long-term debt. These sources from financing activities were partially offset by $6.9 million of payments on the Company’s long-term debt.

 

Capital Expenditures

 

During the fiscal year ended May 31, 2015, Landec continued its expansion of Apio’s value-added processing facility and purchased vegetable processing equipment as well as made facility modifications and equipment purchases at Lifecore to support business growth. These expenditures represented the majority of the $17.5 million of capital expenditures during fiscal year 2015.

 

Debt

 

On August 19, 2004, Lifecore issued variable rate industrial revenue bonds (“IRBs”).  These IRBs were assumed by Landec in the acquisition of Lifecore (see Note 6 to the Consolidated Financial Statements). The IRBs are collateralized by a bank letter of credit which is secured by a first mortgage on Lifecore’s facility in Chaska, Minnesota. In addition, Lifecore pays an annual remarketing fee equal to 0.125% and an annual letter of credit fee of 0.75%.

 

  

On April 23, 2012 in connection with the acquisition of GreenLine, Apio entered into three loan agreements with General Electric Capital Corporation and/or its affiliates (“GE Capital”), (collectively the “GE Debt Agreements”):

 

1)	A five-year, $25.0 million asset-based working capital revolving line of credit, with an interest rate of LIBOR plus 2%, with availability based on the combination of the eligible accounts receivable and inventory balances of Apio and its subsidiaries.

 

2)	A $12.7 million capital equipment loan which matures in seven years payable in monthly principal and interest payments of $175,356 with interest based on a fixed rate of 4.39% per annum.

 

3)

A $19.2 million real estate loan, $1.2 million of which was paid in April 2013, and the remainder maturing in ten years. The real estate loan has a fifteen year amortization period due in monthly principal and interest payments of $141,962 with interest based on a fixed rate of 4.02% per annum. The principal balance remaining at the end of the ten year term is due in one lump sum on April 23, 2022.

 

On July 17, 2014, Apio entered into an amendment with GE Capital, which amended the revolving line of credit dated April 23, 2012 among the parties. Under the amendment, the revolving line of credit increased from $25 million to $40 million, the interest rate was reduced from LIBOR plus 2.0% to LIBOR plus 1.75%, and the term was extended to July 17, 2019, among other changes. The availability under the revolving line of credit is based on the combination of the eligible accounts receivable and eligible inventory (availability was $30.3 million at May 31, 2015). Apio’s revolving line of credit has an unused fee of 0.375% per annum. At both May 31, 2015 and May 25, 2014, there was no outstanding balance under Apio’s revolving line of credit.

 

Also on July 17, 2014, Apio entered into a new equipment loan with GE Capital whereby Apio can borrow up to $25 million based on eligible equipment purchases between August 1, 2012 and August 31, 2015. Each borrowing under this new equipment loan has a five year term with a seven year amortization period. On August 28, 2014, Apio borrowed $7.1 million under the new equipment loan at a fixed rate of 3.68%. On November 24, 2014, Apio borrowed an additional $4.1 million under the new equipment loan at a fixed rate of 3.74%. The Company does not intend to borrow any more funds under this loan.

 

On May 15, 2015, GE Capital and Apio entered into a commitment letter, pursuant to which GE Capital committed to lend Apio up to approximately $14.7 million in equipment financing and approximately $7.7 million in real property financing. The equipment loan and the real property loan will be made pursuant to existing loan agreements dated as of April 23, 2012, as amended May 17, 2013 and July 17, 2014. The equipment loan is available to finance purchases of equipment between May 1, 2015 and June 30, 2017. Borrowings under the equipment loan will have a five-year term and a seven-year amortization. Interest on each borrowing under the equipment loan will be at a fixed rate based on an index rate plus a 5-year swap rate at the time of borrowing. The real property loan will be used to finance the expansion of Apio’s facility in Hanover, PA. The real property loan will have a 10-year term and a 20-year amortization. Interest will be at a fixed rate based on an index rate plus a 10-year swap rate on at the time of borrowing. No amounts had been borrowed under these committed loans as of May 31, 2015.

 

The GE real estate, equipment and line of credit agreements (collectively the “GE Debt Agreements”) are secured by liens on all of the property of Apio and its subsidiaries. The GE Debt Agreements contain customary events of default under which obligations could be accelerated or increased. The GE Capital real estate and equipment loans are guaranteed by Landec, and Landec has pledged its equity interest in Apio as collateral under the line of credit agreement. The GE Debt Agreements contain customary covenants, such as limitations on the ability to (1) incur indebtedness or grant liens or negative pledges on Apio’s assets; (2) make loans or other investments; (3) pay dividends, sell stock or repurchase stock or other securities; (4) sell assets; (5) engage in mergers; (6) enter into sale and leaseback transactions; or (7) make changes in Apio’s corporate structure. In addition, Apio must maintain a minimum fixed charge coverage ratio of 1.10 to 1.0 if the availability under its line of credit falls below $12.0 million. Apio was in compliance with all financial covenants as of May 31, 2015 and May 25, 2014.

 

On May 15, 2015, Apio and Bank of America (“BofA”) entered into a commitment letter and loan agreement, pursuant to which Apio will be permitted to borrow up to $15.0 million to finance equipment purchases made between October 1, 2014 and April 30, 2016 (the “BofA Loan”). Each borrowing under the BofA Loan will have a five-year term and will have a fixed interest rate based on the 2.5-year swap rate at the time of borrowing. Borrowings will be secured by equipment financed with proceeds of the BofA Loan. In addition, on May 15, 2015, Landec and BofA entered into a Guaranty, pursuant to which Landec guaranteed Apio’s payment obligations under the BofA Loan.

 

  

During fiscal year 2015, Apio capitalized $397,000 of loan origination fees from new equipment loans and/or amendments with GE Capital and BofA, no loan origination fees were capitalized in fiscal year 2014. Amortization of loan origination fees for Apio recorded to interest expense for fiscal years 2015, 2014 and 2013 were $206,000, $187,000 and $181,000, respectively. Unamortized loan origination fees were $1.2 million and $1.0 million at May 31, 2015 and May 25, 2014, respectively, and are included in other assets in the Consolidated Balance Sheets.

 

On May 23, 2012, Lifecore entered into two financing agreements with BMO Harris Bank N.A. and/or its affiliates (“BMO Harris”), collectively (the “Lifecore Loan Agreements”):

 

(1)	A $12.0 million term loan which matures in four years due in monthly payments of $250,000 with interest payable monthly based on a variable interest rate of LIBOR plus 2% (the “Term Loan”).

 

(2)	A Reimbursement Agreement pursuant to which BMO Harris caused its affiliate Bank of Montreal to issue an irrevocable letter of credit in the amount of $3.5 million (the “Letter of Credit”) which is securing the IRBs described above.

 

On May 22, 2015, Lifecore entered into a Credit and Security Agreement (the “Credit Agreement”) with BMO Harris which includes (a) a two-year, $10.0 million asset-based working capital revolving line of credit, with an interest rate of LIBOR plus 1.85%, with availability based on the combination of Lifecore’s eligible accounts receivable and inventory balances (availability was $9.4 million at May 31, 2015) and with no unused fee. As of May 31, 2015 no amounts were outstanding under this line of credit.

 

The obligations of Lifecore under the Lifecore Loan Agreements and Credit Agreement (collectively “Lifecore Debt Agreements”) are secured by liens on all of the property of Lifecore. The Lifecore Debt Agreements contain customary covenants, such as limitations on the ability to (1) incur indebtedness or grant liens or negative pledges on Lifecore’s assets; (2) make loans or other investments; (3) pay dividends or repurchase stock or other securities; (4) sell assets; (5) engage in mergers; (6) enter into sale and leaseback transactions; (7) adopt certain benefit plans; and (8) make changes in Lifecore’s corporate structure. In addition, under the Credit Agreement, Lifecore must maintain (a) a minimum fixed charge coverage ratio of 1.10 to 1.0 if Lifecore’s unrestricted cash balance is less than 50% of total funded debt at the end of each fiscal quarter and (b) a net debt cash flow leverage ratio of less than 2.0 to 1.0 at the end of each fiscal quarter. Lifecore was in compliance with all financial covenants as of May 31, 2015 and May 25, 2014. Unamortized loan origination fees for the Lifecore Debt Agreements were $48,000 and $98,000 at May 31, 2015 and May 25, 2014, respectively, and are included in other assets in the Consolidated Balance Sheets.

 

The market value of the Company’s debt approximates its recorded value as the interest rates on each debt instrument approximates current market rates.

 

The Term Loan was used to repay Lifecore’s former credit facility with Wells Fargo Bank, N.A. (“Wells Fargo”). The Letter of Credit (which replaces a letter of credit previously provided by Wells Fargo) provides liquidity and credit support for the IRBs.

 

In May 2010, the Company entered into a five-year interest rate swap agreement under the credit agreement with Wells Fargo which terminated in May 2015. The interest rate swap was designated as a cash flow hedge of future interest payments of LIBOR and had a notional amount of $20 million. As a result of the interest rate swap transaction, the Company fixed for a five-year period the interest rate at 4.24% subject to market based interest rate risk on $20 million of borrowings under the credit agreement with Wells Fargo. The Company’s obligations under the interest rate swap transaction as to the scheduled payments were guaranteed and secured on the same basis as its obligations under the credit agreement with Wells Fargo at the time the agreement was consummated. Upon entering into the new Term Loan with BMO Harris in May 2012, the Company used the proceeds from that loan to pay off the Wells Fargo credit facility. The swap with Wells Fargo was not terminated upon the extinguishment of the debt with Wells Fargo. The fair value of the swap arrangement as of May 31, 2015 and May 25, 2014 was zero and $44,000, respectively, and is included in other accrued liabilities in the accompanying Consolidated Balance Sheets.

 

 

Contractual Obligations

 

The Company’s material contractual obligations for the next five years and thereafter as of May 31, 2015, are as follows (in thousands):

 

		Due in Fiscal Year Ended May
Obligation		Total				2016				2017				2018				2019				2020				Thereafter
Debt principal payments		$	42,519			$	8,353			$	5,567			$	5,782			$	6,005			$	6,655			$	10,157
Interest payments			5,494				1,415				1,176				967				749				499				688
Operating leases			9,419				3,136				2,631				1,768				1,003				257				624
Purchase commitments			16,100				15,100				500				500				—				—				—
Total		$	73,532			$	28,004			$	9,874			$	9,017			$	7,757			$	7,411			$	11,469

 

The interest payment amounts above include: (1) the 4.39% fixed interest rate payments on the April 23, 2102 GE Capital equipment loan, (2) the 4.02% fixed interest rate payments on the GE Capital real estate loan, (3) the 3.68% fixed interest rate payments on the August 28, 2104 GE Capital equipment loan, (4) the 3.74% fixed interest rate payments on the November 24, 2014 GE Capital equipment loan, (5) the 2.79% fixed interest rate payments on the BofA equipment loan, (6) the estimated interest rate payment on the variable Term Loan with BMO Harris based on the four year historical average 30-day LIBOR plus 2% or 2.20% and (7) the estimated interest rate payment on the variable rate IRB based on the five year historical interest rate average for the Municipal Swap Index plus 20 basis points plus the letter of credit and remarketing fees of 0.875% resulting in a estimated rate of 1.21%.

 

Landec is not a party to any agreements with, or commitments to, any special purpose entities that would constitute material off-balance sheet financing other than the operating lease commitments.

 

Landec’s future capital requirements will depend on numerous factors, including the progress of its research and development programs; the continued development of marketing, sales and distribution capabilities; the ability of Landec to establish and maintain new collaborative and licensing arrangements; any decision to pursue additional acquisition opportunities; weather conditions that can affect the supply and price of produce, the timing and amount, if any, of payments received under licensing and research and development agreements; the costs involved in preparing, filing, prosecuting, defending and enforcing intellectual property rights; the ability to comply with regulatory requirements; the emergence of competitive technology and market forces; the effectiveness of product commercialization activities and arrangements; and other factors. If Landec’s currently available funds, together with the internally generated cash flow from operations were not sufficient to satisfy its capital needs, Landec would be required to seek additional funding through other arrangements with collaborative partners, additional bank borrowings and public or private sales of its securities. There can be no assurance that additional funds, if required, will be available to Landec on favorable terms, if at all.

 

Landec believes that its cash from operations, along with existing cash, cash equivalents and marketable securities will be sufficient to finance its operational and capital requirements for at least the next twelve months.

 

Item 7A.     Quantitative and Qualitative Disclosures about Market Risk

 

Not significant.     

 

Item 8. Financial Statements and Supplementary Data

 

See Item 15 of Part IV of this report.

 

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

 

Not applicable.

 

 

Item 9A. Controls and Procedures

 

Evaluation of Disclosure Controls and Procedures

 

As of May 31, 2015 our management evaluated, with participation of our Chief Executive Officer and our Chief Financial Officer, the effectiveness of our disclosure controls and procedures as of the end of the period covered by this Annual Report on Form 10-K. Based on this evaluation, our Chief Executive Officer and our Chief Financial Officer have concluded that our disclosure controls and procedures are effective in ensuring that information required to be disclosed in reports filed under the Securities Exchange Act of 1934, as amended, is recorded, processed, summarized and reported within the time periods specified by the Securities and Exchange Commission, and are effective in providing reasonable assurance that information required to be disclosed by the Company in such reports is accumulated and communicated to the Company’s management, including its Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

 

Management’s Report on Internal Control over Financial Reporting

 

Our management is responsible for establishing and maintaining adequate internal control over financial reporting (as defined in Rule 13a-15(f) under the Securities Exchange Act of 1934, as amended). Our management assessed the effectiveness of our internal control over financial reporting as of May 31, 2015. In making this assessment, our management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”) in Internal Control - Integrated Framework (2013 Framework). Our management has concluded that, as of May 31, 2015, our internal control over financial reporting was effective to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles.

 

Our management, including our Chief Executive Officer and Chief Financial Officer, does not expect that our disclosure controls and procedures or our internal control over financial reporting will prevent all error and all fraud. A control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within the Company have been detected.

 

Our independent registered public accounting firm, Ernst & Young LLP, has issued an audit report on our internal control over financial reporting, which is included herein.

 

Changes in Internal Controls over Financial Reporting

 

There were no changes in our internal controls over financial reporting during the fiscal year ended May 31, 2015 that have materially affected, or are reasonably likely to materially affect, our internal controls over financial reporting.

  

 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

The Board of Directors and Stockholders of Landec Corporation

 

             We have audited Landec Corporation and subsidiaries’ internal control over financial reporting as of May 31, 2015, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework) (the COSO criteria). Landec Corporation and subsidiaries’ management is responsible for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the company’s internal control over financial reporting based on our audit.

 

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

 

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

 

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

In our opinion, Landec Corporation and subsidiaries maintained, in all material respects, effective internal control over financial reporting as of May 31, 2015, based on the COSO criteria.

 

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Landec Corporation and subsidiaries as of May 31, 2015 and May 25, 2014, and the related consolidated statements of comprehensive income, stockholders’ equity, and cash flows for each of the three years in the period ended May 31, 2015 and our report dated July 30, 2015 expressed an unqualified opinion thereon.

 

 

 

/s/ ERNST & YOUNG LLP

 

San Francisco, California

July 30, 2015

 

Item 9B. Other Information

 

None

 

 

PART III

 

 

Item 10.

Directors, Executive Officers and Corporate Governance

 

This information required by this item will be contained in the Registrant’s definitive proxy statement which the Registrant will file with the Commission no later than September 28, 2015 (120 days after the Registrant’s fiscal year end covered by this Report) and is incorporated herein by reference.

 

Item 11.

Executive Compensation

 

This information required by this item will be contained in the Registrant’s definitive proxy statement which the Registrant will file with the Commission no later than September 28, 2015 (120 days after the Registrant’s fiscal year end covered by this Report) and is incorporated herein by reference.

 

Item 12.

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

 

This information required by this item will be contained in the Registrant’s definitive proxy statement which the Registrant will file with the Commission no later than September 28, 2015 (120 days after the Registrant’s fiscal year end covered by this Report) and is incorporated herein by reference.

 

Item 13.

Certain Relationships and Related Transactions and Director Independence

 

This information required by this item will be contained in the Registrant’s definitive proxy statement which the Registrant will file with the Commission no later than September 28, 2015 (120 days after the Registrant’s fiscal year end covered by this Report) and is incorporated herein by reference.

 

Item 14.

Principal Accountant Fees and Services

 

This information required by this item will be contained in the Registrant’s definitive proxy statement which the Registrant will file with the Commission no later than September 28, 2015 (120 days after the Registrant’s fiscal year end covered by this Report) and is incorporated herein by reference.

  

 

PART IV

 

Item 15.

Exhibits and Financial Statement Schedules

 

(a)      1.           Consolidated Financial Statements of Landec Corporation

 

		Page
	Report of Independent Registered Public Accounting Firm	46
	Consolidated Balance Sheets at May 31, 2015 and May 25, 2014	47
	Consolidated Statements of Comprehensive Income for the Years Ended May 31, 2015, May 25, 2014 and May 26, 2013	48
	Consolidated Statements of Changes in Stockholders’ Equity for the Years Ended May 31, 2015, May 25, 2014 and May 26, 2013	49
	Consolidated Statements of Cash Flows for the Years Ended May 31, 2015, May 25, 2014 and May 26, 2013	50
	Notes to Consolidated Financial Statements	51
2.	All schedules provided for in the applicable accounting regulations of the Securities and Exchange Commission have been omitted since they pertain to items which do not appear in the financial statements of Landec Corporation and its subsidiaries or to items which are not significant or to items as to which the required disclosures have been made elsewhere in the financial statements and supplementary notes and such schedules.
3.	Index of Exhibits	78
	The exhibits listed in the accompanying Index of Exhibits are filed or incorporated by reference as part of this report.

 

 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

The Board of Directors and Stockholders of Landec Corporation

 

 

We have audited the accompanying consolidated balance sheets of Landec Corporation and subsidiaries as of May 31, 2015 and May 25, 2014, and the related consolidated statements of comprehensive income, stockholders’ equity, and cash flows for each of the three years in the period ended May 31, 2015. These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on these financial statements based on our audits.

 

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

 

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of Landec Corporation and subsidiaries at May 31, 2015 and May 25, 2014, and the consolidated results of their operations and their cash flows for each of the three years in the period ended May 31, 2015, in conformity with U.S. generally accepted accounting principles.

 

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Landec Corporation’s internal control over financial reporting as of May 31, 2015, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 Framework) and our report dated July 30, 2015 expressed an unqualified opinion thereon.

 

 

 

/s/ ERNST & YOUNG LLP

 

San Francisco, California

July 30, 2015

  

 

 LANDEC CORPORATION

CONSOLIDATED BALANCE SHEETS

(in thousands, except share and per share amounts)

 

 

See accompanying notes.

 

 

LANDEC CORPORATION

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

(in thousands, except per share amounts)